Universal friction and wear testing machine/universal wear tester

Scope of application:

Universal Friction and Wear Tester/Universal Abrasion Tester can be used for surface grinding, curved grinding, edge grinding, hem grinding and anti-blooming abrasion tests such as flower, edge and pile, can be used for woven fabrics, knitted fabrics, coated fabrics, pile fabrics, socks, felt, non-woven fabrics, deep fabrics, yarns, cords, plastic films, rubber, leather, paper, and other various materials. The sample to be tested can be dry or immersed in water, oil or other liquids.

Technical parameters:

1. Clamp inner diameter: 94 mm;

2. Retaining ring height: ≤9.5 mm;

3. Speed: 120±15 /min;

4. Stroke: 25mm;

5. Air pressure: 62 kPa(9psi);

6. Dimensions: 330×500×460 mm (length×width×height);

7. Weight: 33kg (72lb);

8. Power supply: 120/230V, 50/60Hz, 2A/1A. \'\'

Main features:

1. Universal friction and wear tester/Unifresh wear tester is equipped with various accessories to meet different standard requirements, with many functions and a wide range;

2. Equipped with flat grinding test head and curved grinding test head;

3. Equipped with a digital timer;

4. Equipped with LCD timer;

5. Equipped with an electronic touch rubber diaphragm and a non-electronic touch rubber diaphragm;

6. Equipped with a reciprocating workbench and an improved sample box stretcher;

7. Equipped with a set of pressure weights and a set of tension weights;

8. Equipped with a built-in silent air compressor system;

9. Equipped with sandpaper with holes and non-holes sandpaper;

10. Equipped with 50 meters of standard ribbon;

11. Equipped with standard cloth;

12. Equipped with calibration and test blades

Instrument features:

1. Tests are run in automatic mode, which ensures repetitionlable and accurate test results and eliminates the need for operators to evaluate test results;

2. Advanced clamping mechanism ensures constant sample tension;

3. Equipped with flat grinding test head (inflatable film type abrasion test method) and bending test head and required weights and initial abrasives ;

4. Built-in timer and mechanical cycle counter;

5. This machine has a reciprocating table, the test head for flat grinding/bending is mounted on it; 6. Blooming, pilling and edge rub test accessories are available.

Criteria met:A, S, T, M, D3514/D3885/D3886, AATCC 119/120, FORD EFB 15J2/BN 112-01.

Accessories and consumables:

Blooming accessories

Sample holder with selvedge and crease friction

Elastic friction lining

Abrasive 50 yards/roll

3 rating chart for ASTM D3514

Service Commitment:

Three Product Quality Guarantees, One Year Warrantyie and lifetime service.

Prev: Taber abrasion testing machine / Taber abrasion tester