Test the speed and stroke of the universal wear performance tester

Universal wear tester is a commonly used wear tester. It is a test equipment independently developed and produced by qisnun Precision Electromechanical Technology Co., Ltd. It is mainly composed of a control system and a friction system. Mount the specimen on the clamp and tighten it. Drop the top fixture with sandpaper, adjust the position of the weight so that the sandpaper is in contact with the sample surface, set the sample rub times via the control system, and start the \'instrument. The bottom device base moves back and forth to rub the specimen and sandpaper against each other. When the number of movements reaches the set value, the instrument stops and the sample is removed to observe the degree of wear. It is suitable for testing the abrasion performance and abrasion resistance of various fabrics, including thes clothing, footwear and industrial textiles.

Main parameters:

1. Clamp inner diameter: 94mm;

2. Lock height: ≤9.5mm;

3. Speed: 120±15r/min;

4. Stroke: 25mm;

5. Air pressure: 62kPa (9psi).

Scope of application:

It can be used for flat grinding, curved grinding, edge grinding , hem grinding, anti-efflorescence, sealing and edge scraping, etc. rubber, leather, paper and many other materials. The sample to be tested may be dry or immersed in water, oil or other liquids.

Applicable Standards:

ASTMD3514, D3885, D3886, AATCC 119/120, FTMS 191, 5300, 5302, FORD EFB 15J2/BN 112-01

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to continuously providing more instruments in the market, providing long-term test instruments for indoor materials.als, environmental weather aging, masks, etc. are more acceptable for non-standard customization. Targeted tests can be carried out according to customer requirements before purchase to ensure that the instruments purchased are suitable.

Prev: Precautions for Hydraulic Burst Strength Tester