Taber TABER abrasion tester

Product introduction

TABER type abrasion tester is the most widely used product durability testing tool in the world. These products include plastics, paper, coatings, textiles, leather and flooring. It provides fast and accurate test methods for research, development and product quality improvement of raw materials, and these test methods are included in many standards such as ASTM, ISO, NEMA, TAPPI, DIN, SAE and JIS

The top part of the instrument is a sample mount and a pair of sanding wheels. A counterweight is attached to the sanding wheel. The number of times of friction, stop the operation of the instrument, remove the sample, observe the degree of wear to evaluate the wear resistance, and provide reference data for material selection.

TABER Abrasion TesterApplication range

Case, carpet, cardboard, clothing, glass, plastic coating, ceramic tiles, metal coating, paints, varnishes, decorative plates, high voltage plates, plastics, textiles, resilient floor mats, traffic paints, anodized layers, blankets, electronic components, decorative panels, waxes, labels, leather cases, dental materials, car interiors, resins, furniture, etc.

Executive Standards: DIN-53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470

TABER wear test instrumentTechnical parameters

Product model: FLR-208

Test piece size: Outer diameter ￠108mm

Inner diameter ￠8mm, 3mm (D)

Grinding disc: ￠2”(max. 45 mm), 1/2”(B)

Grinding disc center distance: 53 mm

Grinding disc and test disc center Spacing: 37~38mm

Rotation Speed: 60/72rpm/minute

Load: 250g, 500g, 1000g

Counter: LED, 0~999,999, Auto Stop

Distance between test piece and suction opening: 3mm

Machine dimensions: (L×W×H)330×430×310mm

Weight: 18kg (excluding vacuum cleaner)

Power supply: 1∮, 220v/50HZ

Accessories: 1 sample cutter, 1 wrench, 1 set of grinding wheel, 1 pack of gauze paper

Formula for calculation of wear index: grindingLost weight/test revolutions×1000

Industrial application

Refer to ASTM D 3884-2009 standard test principle , use the Taber abrasion tester on soft leather, artificial leather, synthetic leather, microfiber leather, and the abrasion resistance of textiles and other commonly used shoe upper materials were tested and analyzed. Depending on the type and load of the grinding wheel, the optimization test of the test conditions is carried out. The results show that soft surface leather should be tested with a grinding wheel of CS17 and a load of 1000 g, artificial leather, synthetic leather and textiles should be tested with a grinding wheel of H18 and a load of 500 g, and superfiber leather should be tested with a grinding wheel of H18 and eand load of 1000g.

Different test pieces use grinding wheels for reference

Prev: 339 Rubber Alcohol Abrasion Tester