Taber reciprocating wear tester reciprocating wear resistance testing machine

Main application:

Reciprocating abrasion resistance testing machine is used for testing coatings, plastics, decorative fabrics, car interiors Abrasion and scratches physical damage performance of materials such as upholstery and pile fabrics.

Applicable standards:

ASTMF2495, F2496, GME60248, GME60368, GMW14125, ISO1518

Technical characteristics :

1. Stroke range: 6-120 mm adjustable;

2. Speed ​​range: 1-100 reciprocating/min infinitely adjustable;

3. Equipment dimensions: 532mm * 471mm * 630mm (W * D * H);

4. LCD screen control, you can set parameters such as speed and reciprocating movement times;

5. The LCD display shows and controls the test status in real time;

6. Meets various standard requirements and can be equipped with weights and friction heads according to user needs;

7. Power supplyinstrument: 220V, 50HZ, 1A.

Main accessories:

1. Host: 1 set;

2. Test arm kit: 2 sets;

Main accessories:

1. Host: 1 set;

2. Test arm kit: 2 sets;

<stmelting

3. Weight set: 6 pieces (1N, 2N, 2.5N, 5N, 10, 24N);

4.15 grinding head: 2 pieces (semicircle R18, length 40 mm);

5. Sample holder: 2 sets;

6. Brush: 1 piece;

7. Grinding head repair sandpaper: 1 pack (20 pieces);

8. Stainless steel sandpaper fixed;

9. CS-10 grinding head: 2 pieces; H-18 grinding head: 2 pcs.

Balance adjustment:

Includes sample clamping, lever balance adjustment, etc.

Fix the sample on the test platform with a fixture.

Tighten the locking knob so that the handle is level. The rubbing head approaches the sample but does not touch it.

Turn on the power switch, click to enter the test interface, and use the reset button to reset the start and endpositions of the test platform in order to determine the position of the friction head. Now fix the front and rear positions of the balance bar and tighten the locking knob.

Loosen the locking knob, at this point the balance bar may tilt due to the unbalanced front and rear weights. Adjust the front and back positions of the weights until the balance bar is balanced.

Adjust the position of the friction head so that it is in contact with the sample.

Add extra weight to the top of the friction head. At this time, the weight pressed on the sample is the weight of the additional weight.

Main application:

Reciprocating abrasion resistance testing machine For testing coatings, plastics , decorative fabrics, car interiors, velvet fabrics, etc. Abrasion and scratches physical damage properties of materials.

ApplicableStandards:

ASTMF2495, F2496, GME60248, GME60368, GMW14125, ISO1518

Technical characteristics:

1. Stroke range: 6-120 mm adjustable;

2. Speed ​​range: 1-100 reciprocating/min infinitely adjustable;

3. Equipment dimensions: 532mm * 471mm * 630mm (W * D * H);

4. LCD screen control, you can set parameters such as speed and reciprocating movement times;

< p> p>5. The LCD display shows and controls the test status in real time;

6. Meets various standard requirements and can be equipped with weights and friction heads according to user needs;

7. Instrument power supply: 220V, 50HZ, 1A.

Key accessories:

<stmelting

</stmelting

1. Host: 1 set;

2. Test arm kit: 2 sets;

Main accessories:

1. Host: 1 set;

2. Test arm kit: 2 sets;

<stmelting

3. Weight set: 6 pieces (1N, 2N, 2.5N, 5N, 10, 24N);

4.15 grinding head: 2 pieces (semicircle R18, length 40 mm);

5. Sample holder: 2 sets;

6. Brush: 1 piece;

7. Grinding head repair sandpaper: 1 pack (20 pieces);

8. Stainless steel sandpaper fixed;

9. CS-10 grinding head: 2 pieces; H-18 grinding head: 2 pcs.

Balance adjustment:

Includes sample clamping, lever balance adjustment, etc.

Fix the sample on the test platform with a fixture.

Tighten the locking knob so that the handle is level. The rubbing head approaches the sample but does not touch it.

Turn on the power switch, click to enter the test interface, and use the reset button to know the start and end positions of the test platform to determine the position of the friction head. Now fix the front and rear positions of the balance bar and tighten the locking knob.

Loosen the locking knob, at this point the balance bar may tilt due to the unbalanced front and rear weights. Dads Adjust the front and back positions of the weights until the balance bar is balanced.

Adjust the position of the friction head so that it is in contact with the sample.

Add extra weight to the top of the friction head. At this time, the weight pressed on the sample is the weight of the additional weight.

Prev: oscillating abrasion tester Shanghai Qianshi Leather Abrasion Tester for sale