Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Taber Abrasive Test Machine Maintenance معدات اختبار

Taber Abrasive Test Machine Maintenance معدات اختبار

Author:QINSUN Released in:2022-12 Click:147


Product introduction

The Taber Abrasion Tester is mainly used to test the abrasion resistance of leather and plastic materials. Through rotary grinding, various types of friction wheels are used to rotate and rub the sample to test the wear resistance of leather and plastic of the material.

Instrument principle:

The wear resistance of leather and plastic materials is tested by various types of friction wheels on the sample. Select the default applicable weight set for testing material properties. Detect weight loss on the outer surface of the sample, such as obvious mechanical damage.


Test piece: outer diameter 108mm, inner diameter 8mm, 3mm(D)

Grinding wheel: diameter 2”(M*45mm)1/2”(W)

Grinding wheel center distance: 63.5 mm

Center distance between grinding wheel and test wheel: 37~38 mm

Rotational speed: 60/72 rpm

Weight: 250g, 500g, 1000g

Counter: LCD, 0~999,999


Volume: 530×320×310+vacuum cleaner

Weight: 18kg (without vacuum cleaner)

Power supply: 1φ, 220v/50HZ


Calculation formula wear index: wear loss weight/formula number of revolutions×100

Complies with standards:

ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, ISO 9352, ISO 5470 -1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K6964 , DIN 52347, DIN 53109, DIN 53754, DIN 53799. /strong>

(1) Neat tools, accessories, workpieces (products) should be neatly placed, pipes and ducts should be organized;


(2) The inside and outside of the cleanerng equipment is clean and tidy. There is no oil on the sliding surfaces, screw, rack, gearbox, oil hole, etc., and there is no oil or air leakage in any part. The drill cuttings, sundries and dirt around the equipment should be cleaned;

(3) Well lubricated, add oil or change oil in time, keep oiling, no dry friction, and the the oil pressure is normal, the oil marking is clear, the oil circuit is smooth, the oil quality meets the requirements, the oil gun, the oil cup and the linoleum are clean;

(4) Safely follow the safety instructions and do not overload the equipment. The safety features of the equipment are complete and reliable, and unsafe factors can be eliminated in time.

Good equipment maintenance habits are a prerequisite for maintaining good equipment performance and accurate test data. The process has been established. Only this way canthe good performance of the equipment is maintained.