Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Taber abrasion tester / Taber abrasion tester

Taber abrasion tester / Taber abrasion tester

Author:QINSUN Released in:2023-04 Click:139

The upper part of the Taber Abrasion Tester/Taber Abrasion Tester is a test stand and a pair of abrasive wheels, and a counterweight is attached to the abrasive wheels Code, the sample holder is rotated by the motor and the abrasive wheel is driven to create friction between the abrasive wheel and the sample. After a certain number of rubs, the instrument is stopped, the sample is removed, and the wear rate is observed to evaluate the wear resistance. , to provide reference data for material selection.

 

Taber Resist Sharpening Tester/Taber Abrasion Tester The upper part is a sample armature and a pair of abrasive wheels, and a counterweight is attached to the abrasive wheel. The sample holder is rotated by the motor to drive the abrasive wheel, so that the abrasive wheel After friction with the sample, after a certain number of rubs, stop the operation of the instrument, remove the sample, observe the degree of wear and evaluate its wear resistance, and provide reference data for material selection.

 

Applications:

Suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metal sheets, paints, varnishes, decorative plates, high voltage plates, plastics, textiles, elastic floor mats, traffic paint, anodized coating, blankets, electronic components, decorative panels, waxes, labels, leather cases, dental materials, car interiors, resins, furniture, etc.

 

Executive standard:

DIN-53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470, GB/T4085

 

Technical parameters:

Test piece size: outer diameter ¢108 mm, inner diameter ¢8 mm, 3 mm (D)

Grinding wheel: ¢2" (max. 45 mm), 1/2 "(B)

Center distance grinding wheel: 53 mm

Center distance grinding wheel and test wheel: 37 ~38 mm

Rotational speed: 60/72 rpm/min

Load: 250 g, 500 g, 1000 g

Counter: LED, 0~999,999, automatic stop

Distance between test piece and suction hole: 3 mm

Machine dimensions: (L×W×H)330×430 ×310 mm

Weight: 18kg (excluding vacuum cleaner)

Power supply: 1∮, 220v/50HZ

Accessories: 1 test piece cutter, 1 wrench, 1 set of grinding wheels , 1 pack of gauze paper

Formula for calculation of the wear index: wear loss weight / test rotation number × 1000

Different test pieces use grinding wheels for reference:

 

Prev:

Next: