Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Rubber wheel abrasion wear tester / wet rubber wheel abrasion wear tester

Rubber wheel abrasion wear tester / wet rubber wheel abrasion wear tester

Author:QINSUN Released in:2023-04 Click:102

The Rubber Wheel Abrasion Wear Tester/Wet Rubber Wheel Abrasion Wear Tester uses sliding friction according to ASTM G65-04 standard under certain test conditions. Evaluate the performance of engineering plastics, powder metallurgy, alloy bearings, etc.

 

Main application:
Rubber wheel abrasive wear tester / wet rubber wheel abrasive wear tester under certain test conditions, according to ASTM G65-04 standard using sliding friction. Formally evaluate the performance of engineering plastics, powder metallurgy, alloy bearings, etc.
Main parameters:
1. Indication Accuracy: ±1%
2. Spindle speed setting range: 10r/min-200r/min
3 Spindle speed accuracy: 1r/min
4. Temperature measurement range: room temperature - 200 ° C
5. Test Revolution: 1-9999999 isetting
6. Input voltage: AC 380V
7. Input power: 2.2kW
8. Adjustment range of sand supply system: 10-500 g/min

Main features:
1. It is composed of two parts: the main engine and the operating system;
2. The main motor part includes the base, the main shaft and drive system, the weight loading system and the sample clamping part;
3 The control system includes measurement and control, display The instrument part, the two parts are connected by control cables;
4. Tests can be performed under different conditions of changing parameters such as load, speed, time, friction partner material, surface roughness and hardness.

Rubber Wheel Abrasive Wear Tester/Wet Rubber Wheel Abrasive Wear Tester Test Process:
1. The main shaft box is installed on the machine base, and the main shaft is composed of a set of bearing support with high rotational accuracy. The backant of the main shaft is connected to the motor;
2. There is a weight loading system on the right half of the base, which can apply a maximum radial load of 200N to the sample on the main shaft; front end of the main shaft, and the outer sample is pressed and fixed in the outer sample slot of the force bar;
4. Apply and remove the test force It is completed by the loading system, and the size is completed by loading weights, loading the equal arm weight plate from the lever and sending the double arm code
5. The LCD screen displays the spindle speed and test time;
6. For adjusting and setting the speed, refer to the manual of the frequency converter;
7. The test time is controlled by After the instrument is completed, the test time can be preset by usingof the dial, and when the time is up, it will alarm and shut down for protection;
8.The instrument shows the temperature change of the sample during the test.

Service Warranty:
1. Outside the warranty period, our company\'s technical personnel will make no less than three repeat visits per year to examine user usage;
2. Service principle: fast, decisive, accurate, considerate and efficient;
3. Service purpose: service quality to win customer satisfaction;
4. Service efficiency: if the equipment fails during the warranty period or outside the warranty period, the supplier will respond immediately. After notification, the maintenance staff will provide a solution within 24 hours.

Prev:

Next: