GS series multi angle gloss meter

GS series multi angle gloss meter

The GS series multi angle gloss meter can choose up to 4 precise fixed measurement angles, including 20 °, 45 °, 60 °, 75 °, and 85 ° (75 ° and 85 ° cannot be selected simultaneously). It can measure the flat surface of large-sized samples. Simply place the sample on the measuring table and the measured values can be clearly displayed.

If necessary, the TAPPI beam convergence method (20 ° and 75 °) can be used.

Applicable fields:

The accuracy of the GS series photometers can reach 4 degrees, which can meet the requirements of different industries for different angles of use. The GS series photometers comply with ASTM D2547 and ASTM D235 standards. The GS series glossmeter is widely used in industries such as ink, paint, baking paint, coatings, wood products, marble, granite, and vitrified polished bricks.

Technical parameters:

Models: GS-1K (1 angle), GS-2K (2 angles), GS-3K (3 angles), GS-4K (4 angles)

Measurement angle (fixed): Up to 4 angles, 20 °, 45 °, 60 °, 75 °, 85 ° (75 ° and 85 ° cannot be selected simultaneously)

Statistical processing: an average of 99 readings plus standard deviation

Data storage: up to 1000 readings

Tolerance: Δ Gs standard deviation within 0.1 (after 10 consecutive measurements on the gloss calibration standard plate)
​​​​​​​

Size and weight:

Optical device: approximately 44 (W) x 17.5 (D) x 24 (H) cm [weight: 9kg]

Measurement device: approximately 23 (W) x 33 (D) x 14 (H) cm [Weight: 4kg]

Prev: Visible light transmittance and reflectance tester