FLR-101A small initial viscosity testing machine

Product introduction

Xiao Chu stickiness The testing machine is mainly used for initial adhesive testing of pressure sensitive tapes and related products such as pressure sensitive adhesive tape products. It is easy to operate and very practical.

This testing machine provides a run-up path with a fixed angle steel ball and then uses the distance the steel ball rolls before being held by the tape to assess the initial stickiness of the tape .

Test standard:

Small initial adhesion tester The design and test conform to GB/T 4852, JIS Z0237 standard

Technical parameters:

Product model: FLR-101A Small initial tack tester

Test piece size: width 25mm, length 100mm Above , no less than 3 test pieces;

Slope Lenlength: 6.5 inch

Dimensions: (L×W×H) 230×60×70mm

Inclination angle: 21.5°

Ball Diameter: Ball Diameter: Ball Size: Diameter 14/32”=11.112mm, No. 14 Standard Steel Ball

Weight: 800g

This product is a first adhesion tester for adhesive tape and self-adhesive adhesive products, rolling ball testing device

Prev: Impact tester with glass lid