Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Dust Abrasive Tester|Martindale Abrasive Tester|Martindale Surface Abrasive Tester

Dust Abrasive Tester|Martindale Abrasive Tester|Martindale Surface Abrasive Tester

Author:QINSUN Released in:2023-04 Click:119

Conforms to standards:
ASTM D4970; ISO 12945.2; GB/T 4802.2/13775/21196.1/21196.2; ASTM D4966; 12947; FZ/T 20020; BS 3424-24/5690; ISO 12947.1/12947.2 M&S P17/P19/P19C; NEXT 18/18a/18b; ISO 5470-2; TM 112/196; BS EN 388/530/13770; ISO 20344

The round sample is placed under a fixed pressure and the friction medium rubs according to the Lissajous trajectory. In addition, the sample holder wrapped with friction medium can also rotate freely about its own axis and the plane of the sample plate. The evaluation of the anti-wear performance of textiles is judged by the changes of the surface before and after friction.
The mass of the sample holder and spindle is (18 ± 2) g. The appearance change of the test sample is evaluated by comparing the sample before and after rubbing.

Scope of application:
It can improve the abrasion resistance and pilling performance ofdetect different plants. Under a certain pressure, the sample and the abrasive are subjected to continuous reversing friction, and the degree of wear and pilling is assessed by comparison with the standard parameters. Touch screen control, equipped with a complete programmer, pre-programmed batch and total counts, individually set counts for each test head; selectable from 4 speeds including standard speed.

Product details:
Technical parameters:
1. Number of stations: 9;
2. Count range: 0~999999 time

3.Maximum stroke: horizontal 60.5 ± 0.5mm vertical 24 ± 0.5mm

4. Mass of pressurized material:
a. Holder: 200±1g

b. Garment sample weight: 395±2g
c. Sample furniture decoration weight: 594±2g
d. Stainless steel butterfly: 260±1g

5. Effective friction diameter of grinding block:
A type 200g (1.96N) friction head (9KPa) ¢ 28.8 -0.084mm
B type 155g (1.52N) friction head (12KPa) ¢90 -0.10mm

6. Relative speed of gripper and grinding table: 20-70r/min (adjustable)
7. Loading hammer mass: 2385±10g


Tool configuration and consumables:
1. 9 sets of sample holders;
2.9Kpa, 12KPa each 9 weights;
3.One set of Φ38mm and Φ140mm sampler;
4.One piece support plate for Φ38mm and Φ140mm sampler;
5. One set of pilling test set;
6.One standard photo of SM50 set;
7 One set of EMPA standard pilling samples and one piece of SM-25 standard abrasive cloth 1.6m×5m;
8. A set of standard foam 1.5 m × 0.5 m (4 pcs/set);

9. A piece of standard felt sheet;
10. 20 pcs Φ90mm felt discs;
11. 50 pcs Φ38mm and Φ140mm sampling sheets each;
12. Other accessories recommended by the manufacturer.