DIN abrasion tester / DIN rubber abrasion tester

Main application:
din wear tester/DIN rubber wear tester has the advantages of small sample size, time saving, non-repeating friction path, low noise, high efficiency, good reproducibility, easy operation and other characteristics, mainly used to test the wear resistance of rubber, tires, shoe soles, elastic materials, conveyor belts, soft synthetic leather and other materials.

Main parameters:
1. Test specimen: φ16mm, 6~15mm (D)
2. Luminaire load: 2.5N
3. Weight load : 2.5N, 5N
4. Abrasive cloth: 60#
5. Roll diameter: 150 mm Roll length: 460 mm Roll speed: 40 rpm
6. Planned stroke: 40m /20m

7. Sanding speed: 0.32 m/sec
8. The angle of inclination is 3°: the angle between the support axis of the test piece and the vertical surface of the roller
9. The lateral displacement of the luminaire: 4.2 mm/each circle of the roller

Detection principle:
Under a certain load, at a certain level of mesh, the columnar sample is transversely cut and ground on the surface of the mesh for a certain impact, by measuring the mass abrasion of the sample, and then measuring the volume abrasion calculate based on the density of the sample, in order to make the test comparable, the standard rubber should be used at the end, and the test results are expressed as based on the calibrated mesh. The relative volume wear or foot is expressed as the wear resistance basis against the wear of a given standard rubber.

din Abrasion Tester/DIN Rubber Abrasion Tester meets the standards:
DIN 53516, JIS K6369, GB/T 20991 No. 8.3, GB 20265-2006, GB20266 -2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649

Service Warranty:
1. There are many technicians in our company every year outside the warranty period Examine the usecherry use in three return visits;
2. Service aim: fast, decisive, accurate, considerate and professional;
3. Service purpose: service quality to win user satisfaction;
4. Service efficiency: If the equipment fails within the warranty period or outside the warranty period, the maintenance personnel will solve it within 24 hours after the supplier receives the notification.

Prev: RCA Wear Tester / RCA Wear Tester