Air cooled xenon lamp aging test chamber

Air cooled xenon lamp aging test chamber

The air-cooled xenon lamp aging test chamber uses xenon arc lamps that can simulate full sunlight spectrum to reproduce destructive light waves in different environments. It can provide corresponding environmental simulation and accelerated testing for scientific research, product development, and quality control. In a few days or weeks, outdoor hazards that occur for months or even years can be reproduced. The Qinsun air-cooled xenon lamp aging test chamber has good repeatability and simulates natural aging technology for light and climate resistance tests, which helps to establish new standards for durability testing of textile materials. It can be widely used in plastics, packaging materials, automotive coatings, interiors and plastic components, paints, coatings and pigments, printing inks, optoelectronic products, and industrial geotextiles. The Atlas Xenontest 150S+air-cooled xenon lamp aging testing machine meets almost all universal textile standards.

Product Usage:

The use of xenon arc lamps that can simulate full sunlight spectra to reproduce destructive light waves in different environments can provide corresponding environmental simulation and accelerated testing basis for scientific research, product development, and quality control. To evaluate the light and weather resistance of certain materials under the action of high-temperature light sources, aging tests are conducted on material samples exposed to xenon arc lamp illumination and thermal radiation. They are mainly used in automobiles, coatings, rubber, plastics, pigments, adhesives, fabrics, etc

Compliant with standards:

AATCC TM16H-1998 TM169.ASTM G151 G155 D6695.ISO 105-B02 105-B04 12040 4892-1. JASO M346. M&S C9 C9A.

Product parameters:

Temperature range: RT+10 ℃~70 ℃

Humidity range: 65% to 98% RH

Blackboard temperature: 63 ℃~100 ℃

Temperature uniformity: ≤ 2.0 ℃ (in the dark)

Temperature fluctuation: ± 0.5 ℃ (in the dark)

Humidity deviation:+2, -3% RH

Spray nozzle aperture: Ф 0.8mm

Rainwater pressure: 0.12-0.15Mpa

Rainfall time: 1-999M, adjustable for continuous rainfall

Spray cycle: 18min/102min or 12min/48min (spray time/stop time)

Light cycle: 1-999h, m, s continuously adjustable

Sample tray size: 450 x 720mm

Distance between sample holder and lamp: 230-280mm

Wavelength: 290-800nm

Radiation intensity: ≤ 550W/㎡

Xenon lamp power: 2.5KW x 3 units=7.5KW

Heating power: 3.0KW

Humidification power: 2.0KW

Outer box material: High quality A3 steel plate electrostatic spraying

Inner box material: imported high-grade stainless steel SUS304

Temperature and humidity controller: "Taiwan Weilun" touch screen+"German Siemens" PLC module

Temperature and humidity sensor: PT100 platinum resistance thermometer

Standard configuration: 3 lamp tubes, 1 layer of sample holder

Safety protection: compressor overpressure, compressor overload, water shortage protection, fan motor overheating, overall equipment overheating, overall equipment under phase/reverse phase

The overall equipment is protected by timed leakage protection, water shortage protection, and automatic shutdown after fault alarm

Power supply voltage: AC380V ± 10% 50Hz

Power: 14.5KW

Usage environment: 5 ℃~+28 ℃ ≤ 85% RH

Test environment:

1. The above data were all measured under good ventilation conditions in an operating environment with a temperature of 25 ℃

2. Non standard customization of air-cooled xenon lamp climate resistance test chambers can be made according to user specific test requirements

Prev: Carpet combustion tester