Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Abrasion testing machine for floor taber Abrasion testing machine

Abrasion testing machine for floor taber Abrasion testing machine

Author:QINSUN Released in:2023-04 Click:105

Floor Abrasion Tester-taber Abrasion Resistance Tester produces an \"X\" type friction effect on the rotation of the friction wheel. Equipped with a full set of auxiliary weights, sample holders, friction wheels, vacuum devices, membrane control keypads and electronic counters

Product Introduction

Experimental principle:

Resistance of floor abrasion tester-taber Abrasion testing machine produces friction of the type \"X\" by the rotation of a pair of friction wheels. Equipped with a full set of auxiliary weights, sample holders, friction wheels, vacuum devices, membrane control keypads and electronic counters.

Product details:

The Taber wear resistance tester mainly uses various kinds of friction wheels to rotate on the sample by rotary grinding Testing thewear resistance of leather and plastic materials. Select the default applicable weight set for testing material properties. Detects weight loss on the outer surface of the sample, such as obvious mechanical damage, TAPPI T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K6964, DIN 52347, DIN 53109, DIN The detection includes metal, paint, plate surface, coating Abrasion resistance of layer materials, textiles, leather, rubber, etc. Applications: Suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metal plates, paints, varnishes, decorative plates, high-voltage plates, plastics, textiles , resilient floor mats, traffic paint, anodizing, blankets, electronic parts, decorative panels, waxes, labels, leather cases, dental materials, car interiors, resins, furniture, etc.

Specifications:

Test piece: outer diameter 108mm, inner diameter 8mm, 3mm(D)

Grindwheel: diameter 2”(M*45mm)1/2”(W)

Grinding wheel center distance: 63.5mm

Center of grinding wheel and test wheel Distance: 37~38mm

Rotation speed: 60/72 rpm

Weight: 250g, 500g, 1000g

Counter: LCD, 0 ~ 999,999

Volume: 530×320×310+vacuum cleaner

Weight: 18kg (excluding vacuum cleaner)

Power supply: 1φ, 220v/50HZ

Wear index calculation formula: wear loss weight / formula number of revolutions × 100

Taber 5135 abrasion testing machine features:

*Abrasion process

Place the material to be tested on the turntable and the two grinding wheels press with a certain weight on the material to make it wear.

When a sample with an area of ​​10 x 10 cm is subjected to abrasion, the surface material of the sample is abraded by full angle particles or silk fabrics to form a complete ring.

The grinding wheel rotates with the rotating surface of the monstar wheel, resulting in relative movement and wear, and the offset of the grinding wheel axis from the rotary axis of the turntable during the rotation process produces a sliding movement, causing the material to abrade.

Simulate the actual conditions of use or meet the test conditions specified in the standard

- A variety of different wear media and accessories can be selected for different tests

- Yes Repeat the test on the same point of a material, the thickest material about 0.5\" is damaged or worn

- Two speeds can be set (60, 72 rpm), 0-50000 rpm (Fast set 100, 500, 1000 or 2500 rpm) and 3 types of load.

Vacuum cleaner removes dirt

The suction arm of the vacuum pump goes through the hinge and the back of the instrument The adjustable device connection can precisely adjust the height to adapt to different sample thicknesses

Ensure the stability and accuracy of the test

Strict control ensures reliable results

Selected grinding wheel abrasives are selected through strict quality control, with high quality and good stability

Control panel Has the following functions:

Digital display test phase and menu selection:

Rotation number selection key - used to set the number of rotations

Vacuum degree - Adjustable vacuum pump suction

Number of rubbed revolutions - Shows the number of completed revolutions (press ONStart counting automatically after pressing the start button)

Let the vacuum cleaner run - for cleaning the drive shaft and the sample table

Internal memory system can record the number of revolutions in case of a sudden power failure

Prev:

Next: