Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Wear tester for rubber rollers / Wear tester for sole

Wear tester for rubber rollers / Wear tester for sole

Author:QINSUN Released in:2023-03 Click:121

Rubber Roller Wear Tester/Sole Wear TesterStandard Configuration:
2 sheets P60# standard sandpaper, standard die 1 piece, 5 pieces standard test pieces, 1 piece aluminum bar , 1 piece of brush and 1 piece of small table bench drill.

Product details:
Rubber Roller Abrasion Tester/Sole Wear TesterThe sample Placed in a specific carrier and on a drum wrapped in standard sandpaper. The operator records the weight of the sample before and after the test to detect the weight loss and uses this value to calculate the abrasion resistance via the standard formula.

Application:
Suitable for elastic materials, rubber, tires, conveyor belts, soles , The wear measurement of soft synthetic leather and other materials has the characteristics of high performance, good reproducibility and simple bedloan.

Main principle:
Under a certain load, at a certain level of mesh, the columnar sample is placed horizontally on the surface of the mesh Cut it grinding of a certain stroke, by measuring the mass wear of the sample, and then calculate the volume wear according to the density of the sample, in order to make the test comparable, the standard rubber should be used at the end, and the test results expressed as calibration. The relative volume wear based on the tested mesh or wear resistance basis expressed in relation to the wear of a given standard adhesive.

Standard:
DIN 53516, JIS K6369, GB/T 20991 No. 8.3, GB 20265-2006, GB20266-2006, SATRA T/M174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.

Product Features:
Roller type grinding machine is also called DIN sanding machine is used to reduce wearMeasure the softness of rubber tires, rubber shoes, tapes, etc. to identify the quality of rubber products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke. Meet the requirements of GB9867, ISO4649 and DIN53516. The machine has the advantages of small sample size, time saving, non-repetitive friction path and low noise.
Weight load: 2.5N, 5N
Side displacement clamp: 4.2mm/roll per circle
Sanding cloth: 60#
Roller diameter: 150mm
Roll length: Roll of 460mmWheel speed: 40rpm
Stroke schedule: 40m/20m
Wear rate: 0.32m/sec
Pitch angle: 3°The angle between the test piece\'s support axis and the vertical surface of the roller
Volume: 70 ×30×30cm
Weight: 61kg
Power supply: 1∮, AC220V, 3A

Prev:

Next: