Universal wear resistance tester
This instrument is mainly composed of a control system and a friction system. Mount the specimen on the clamp and tighten. Lay down the top fixture with sandpaper, adjust the position of the weight so that the sandpaper contacts the surface of the sample, set the sample friction times through the control system, and start the instrument. The base of the lower armature moves back and forth to make the sample and sandpaper rub together. When the number of movements reaches the set value, the instrument stops and the sample is removed to observe the degree of wear. It is suitable for testing the abrasion resistance and abrasion resistance of various fabrics, including clothing, shoes and industrial textiles.
Meet the standard:ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01
FInstrument Features:
1. The test is run in automatic mode, which not only ensures repeatable and accurate test results, but also eliminates the need for operator evaluation. Time to result;
2. Advanced clamping mechanism ensures constant sample tension;
3. Equipped with flat grinding test head (inflatable film type abrasion test method) and curved grinding test head, required weights and initial abrasives;
4. Built-in timer and mechanical cycle counter;
5. This machine has a reciprocating table, flat. The grinding/bending test head is installed at the top;
6. Accessories for blooming, pilling and edge rubbing testing are available.
Accessories and consumables:
Blooming accessories
Selvedge and pleat friction sample holder
Elastic Friction Liner
Abrasive 50 yards/roll
3-Grade Chart for ASTM D3514
TScope of application:
This instrument can be used for surface grinding, curved grinding, edge grinding, seam grinding and abrasion resistance testing such as anti-blooming, edge closure and burling. It can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, felt, nonwovens, deep fabrics, yarns, cords, plastic films, rubber, leather, paper and many other materials. The sample to be tested can be dry or immersed in water, oil or other liquids.
Prev: Taber Abrasion Tester-Standard Group
Next: Schober Abrasive Tester / Abrasive Tester Standard Group