Universal wear performance tester, speed and stroke test

The universal wear performance tester is a commonly used wear resistance testing machine. This is a test equipment independently developed and produced by qisnun Precision Mechanical and Electrical Technology Co., Ltd. It is mainly composed of a control system and a friction system. Mount the sample on the clamp and tighten it. Put down the upper clamp equipped with sandpaper, adjust the position of the weight so that the sandpaper is in contact with the sample surface, set the number of sample friction through the control system, and start the \'instrument. The bottom base of the fixture moves back and forth to rub the sample and sandpaper against each other. When the number of movements reaches the set value, the instrument stops and the sample is removed to observe the degree of wear. It is suitable for testing the performance and wear resistance ofe various types of fabrics, including clothing, footwear and industrial textiles.

Main parameters:

1.Inner diameter of clamp ring: 94mm;

2. Lock ring height: ≤9.5mm;

3. Speed: 120 ± 15 rpm;

4. Stroke: 25 mm;

5. Air pressure: 62 kPa (9 psi).

Scope of application:

Can be used for flat grinding, curved grinding, edge grinding, hem grinding and anti-hatching, edge closing and lint, etc. Abrasion resistance test can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, felts, non-woven fabrics, deep fabrics, yarns, cords, plastic films, rubber, leather, paper and other materials. The sample to be tested may be dry or immersed in water, oil or other liquids.

Applicable standards:

ASTMD3514, D3885, D3886, AATCC 119/120, FTMS 191, 5300, 5302, FORD EFB 15J2/BN 112-01

Shanghai Panbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to continuously providing more testing instruments to the market and providing long-term services for textiles, leather, combustion, automobiles. Testing instruments for interior materials, environmental climate aging, masks, etc. can also be customized to meet non-standard requirements. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: Test method of fabric static tensile property tester