Type 60 salt spray test chamber

Product Introduction

The 60-type salt spray test chamber is an artificial climate simulation environment \"three defense\" (humid heat, salt spray, mold) one of the testing equipment, it was developed and produced as early as World War II, and it has become a necessary testing equipment in the environmental testing equipment industry. It is a very important and necessary testing equipment to test the reliability and adaptability of the products produced in instrumentation and other industries after surface treatment.

Type 60 Salt Spray Test ChamberScope of Application

Salt Spray Corrosion Test Chamber is mainly used for auto parts, electroplating, coatings, electronics Salt spray corrosion test of vital parts, anodic treatment , anti-rust oil and other anti-corrosion treatment, metal protective coating and industriel products, widely used in automobiles, aviation, scientific research institutions, colleges and universities, electronic electrician, hardware manufacturing electroplating, surface treatment, electrical Chung, Dacromet and other fields, especially for the material surface protection in coastal areas has a huge market demand.

Type 60 Salt Spray Test ChamberTechnical Information

1. Model and name: FLR-201 Type 60 salt spray test chamber

2.Specifications

Inner box size: 600×450×400mm ( W * D * H)

Outer box size: 710 × 560 × 560 mm ( W * D * H )

Power supply: single phase 220V 2KW 50HZ

Third, technical basis

According to JIS , ASTM, CNS, GB default parameter control settings

A salt spray test: NSS, ACSS

1 Laboratory:35°C±1°C Fluctuation: ≤±0 ,5°C Uniformity: ≤2°C

2 Saturated air vessel: 47°C±1°C

B Corrosion resistance test: CASS

1 Laboratory: 50°C±1°C fluctuation Temperature: ≤±0.5°C Uniformity: ≤2°C

2 saturated air vessels: 63°C±1°C

Fourth, safety protection device

1 When the water level is low, the power supply is automatically cut off and the safety warning light lights up

2 When the temperature is over, the power supply of the heater is turned off shuts down automatically and the safety warning lamp lights up

3 When the water level of the reagent (salt water) is low, the safety warning lamp lights up and an alarm is generated.

4 Leakage protection function to prevent the Personal injury and instrument failures caused by circuit leakage or short circuit

5. Water addition system

Use of automatic and manual water addition systems, automatic or manual refilling of pressure vessels and laboratory water levels to prevent water shortage and ultra-high temperatures from damaging the instrument

6. Wake Uptesting system

Remove the salt mist in the test chamber during the test process and seal to prevent corrosive gas from flowing and damaging other precision instruments in the test room

Strainers, standard configuration

a. Storage rack…………………… 1 set (8 pieces of 0-shaped bars in the top row, 4 pieces of frame in the bottom row)

b. Standard graduated cylinder……………… 1 piece

c. Temperature indicator needle……………… 2 pieces

d. Collection cup…… …………… 1 piece

e. Glass mouthpiece…………………………… 1 piece (regular cleaning)

f. Humidity cup……… 1 piece

g. Salt water filter……………… 1 piece (regular cleaning)

h. Spray tower ………………… 1 set

j. Demisting system………………1 group

k. Automatic water addition system………………1 group

Prev: Test machine against yellowing