Treadwheel Tester / Quadruped Treadwheel Tester / Quadruped Treadwheel Tester is used to test the ground cover textile materials on running wheel 4-leg walking The abrasion resistance under pressure is a good performance test instrument for the abrasion resistance of textile ground covering materials.
Product Introduction
Main Application : Treadwheel Tester / Four Leg Tread Wheel Tester / Four Leg Tread Wheel Tester is used to test the abrasion resistance of ground cover textile materials under the pressure of four leg treadwheels, is a good performance testing instrument for the abrasion resistance of ground cover textile materials.
Test Principle:
Treadwheel 4 legs walk on the ground and cover textile material, under the action of pressure, the fluff is worn and compressed, and the weight loss and appearance change of the sample isobserved To measure the abrasion resistance of textile materials.
Test standard:
DIN 54322 Determination of textiles; Determination of the wear process of textile floor materials, tread test
DIN EN 1963 Floor covering materials. Test with Lisson treadmill
Product features:
1. Precise design, beautiful appearance, equipped with counting system.
2. Button control, high precision, safe and reliable, good stability, easy to operate.
3. The instrument has good stability and low noise.
4. The tread covers the sole of the foot and can be replaced.
5. Equipped with a suction device for collecting loose fibers.
Technical parameters:
1. Pedal wheel linear speed: 0.28 m/sec
2. Peripheral speed: 0.336 m/sec
3. Two-stroke performance: about 7min
4. Tread Wheel Diameter: 225mm
5. Width of tread wheel: 55mm
6. Calltread wheel load : 15kp
7 .Test slip : 18%
8. Power supply: 1x230V, 50/60Hz N PE
9. Dimensions: 2000mm x 920mm x 1220mm
10. Control method: FPS control method
Prev: Quadruped Wheel Tester / Quadruped Wheel Tester
Next: Socks Abrasion Tester/Socks Abrasion Testing Machine/Shoes and Socks Abrasion Testing Machine