Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > The running and reciprocating speed of the rubbing head of the Xuezhen type rubbing color fastness tester

The running and reciprocating speed of the rubbing head of the Xuezhen type rubbing color fastness tester

Author:QINSUN Released in:2023-08 Click:103

Xuezhen-type rubbing color fastness tester is a test equipment independently developed and produced by our company qisnun Precision Electromechanical Technology Co., Ltd. This is a cost-effective and comprehensive after-sales service. It is mainly used for the evaluation and evaluation of color fastness to rubbing of dyed fiber textile products. Judgment, in accordance with Japanese JIS series standards.

Main parameters:

1. Curved test bench (Japanese standard: the shape proposed by the Society for the Promotion of Science);

2. Number of samples: 6

3. Sample table: curved table, surface radius 200 mm;

4. Shape of the friction head: curved surface, surface radius 45 mm;

5. Test load: 2 N;

6. Friction stroke: 100 mm;

7. Reciprocating speed: 30 times/min;

8. Preset times: 1 time to 9999 times, 10 times to99990 times, 100 times to 999900 times, three levels.

Applicable standard:

JIS L0801-2004 General rules of color fastness test method;

JIS L0823, JIS L1006;

JIS L1084-2009 test method for flocked fabrics;

JIS K6328-1999 Rubber - fabric test method coated;

JIS P8136 Determination of abrasion resistance of paperboard;

JIS L0849-2004 Type II (Gakuzaki type) Test method for color fastness to rubbing .

Testing steps:

1. Install the specimen: first secure one end of the specimen with the inner specimen clamp, then secure the other end with the front sample clamp . To prevent the specimen from coming loose, squeeze the specimen slightly to hold it in place. When the sample is a tensile sample, it can be fixed on the test bench with double-sided tape. Moreover, whens the sample table stops at the inside position, it will be difficult to install the sample, so you can press the approach button at this time and then move it to the front position.

2. Install the white cotton cloth for friction: lift the friction head bracket and lean it against the rear support rod. Spread a white cotton cloth on the friction surface (curved surface), then secure it with a square spring clip on it. Please note that no creases may appear on the white cotton fabric at this time.

3. Place the friction head holder on the specimen table, please confirm that the specimen table is at the front of the hand before putting the friction head holder , if it is not in front of the hand, press the approach button to move it Move to the position in front of the hand and put down the support of the friction head.

4. Turn on the intpower switch and set the number of counters.

5. Press the start button, the machine starts to reciprocate and stops automatically when the set number of times is reached. If you want to stop the test in the middle of the test, please press the stop button.

6. Judgment of test results: After the test, judge the white cotton cloth for rubbing according to JIS 0801 9 (color rapidness judgment). (Compared to gray sample card for stain evaluation)

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. Multi-test instrument delivery market, providing long-term test instruments for textiles, leather, combustion, automotive interior materials, environmental weathering, masks and protective clothing, etc. , and canalso accept non-standard customization. Perform targeted testing to ensure purchased instruments are applicable.