The method of setting the speed of Taber 5135 wear resistance testing machine معدات اختبار

Product Introduction

Taber 5135 Single Grinding Disc Abrasive Testing Machine or Taber 5155 Double Grinding Disc Abrasive Testing Machine The speed can be selected from 60 or 72rpm. The selected speed will be used as the default for each test until the speed is reset. The speed is shown on the display.

The following describes how to change the working speed. Before changing the speed, the instrument is in stop state (the display screen in running state or grinding state should show Stopped)

1. Press MENU to display the menu selection to give (see the menu as shown below) ;

2. Press 1 in the menu selection, choose to change the speed;

3. Using number keys, select "1", it is 60rmp, select "2" is 72rmp. Marked with an asterisk (*) to indicate the current default speed.

4. Press START to start the testt to start.

The speed of the abrasion tester is in revolutions per minute, and one revolution represents one revolution of the turntable (the factory default speed is 60 rpm).

More about: Taber 5135 abrasion tester

Prev: Analysis of corrosion resistance and wear resistance of plasma sprayed nickel based abrasive seal coating