Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Taber Abrasion Tester Operation Steps

Taber Abrasion Tester Operation Steps

Author:QINSUN Released in:2023-08 Click:100

The Taber wear resistance tester is a test equipment independently developed and produced by our company qisnun Precision Electromechanical Technology Co., Ltd. It has high cost performance and comprehensive after-sales service. The weight rotates the specimen holder through the motor and drives the abrasive wheel, causing friction between the abrasive wheel and the specimen. After a certain number of rubs, stop the operation of the instrument, remove the sample, observe the degree of wear, and test its wear resistance. Evaluation, providing reference data for material selection.

Complies with standards:

DIN 53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO 5470, GB/T4085


Suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metallization, paints, varnishes, decorative foils, high pressure foils, plastics,textiles, resilient floor mats, traffic paints, anodized layers, covers, electronic parts, decorative panels, waxes, labels, leather cases, dental materials, automotive interiors, resins, furniture, etc.

Operation steps:

1. First: prepare accessories and test samples;

2. Install the prepared sample on the test platform and fix it;

3. Install the friction wheel on the device and load the weight of balancing on both sides;

4. Adjust the height of the suction wall of the vacuum pump to remove debris on the sample;

5. Put on another station of the instrument in the sample in the same way;

6. Open the switch of the instrument, set the number of rolling transmissions in the timer;

7 Start, the friction wheel will rub the sample at a certain speed;

8.Reach the set value, automatically stop, remove the friction wheel and weight, loosen the clamp and remove the sample;

9 After the test is completed, turn off the instrument, remove the sample, analyze and compare to evaluate the friction resistance. material performance position.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to providing more test instruments to the market, long-term supply of textile, leather, combustion test instruments, automotive interior materials, environmental weather aging, masks and protective clothing, etc., can also accept non-standard customization. Before purchase, we can carry out targeted tests according to customer requirements to ensure that the instruments purchased are suitable.