T270 plastic abrasion tester/taber abrasion tester

Main purpose:

Plastic wear tester/taber wear tester is a self-produced product of our standard group, using a standard cutter. the sample, specify the type of sandpaper, carry it with a certain weight, take out the test piece after reaching the specified number of revolutions, and observe the condition of the test piece, suitable for leather, cloth, paint, paper, floor tiles, plywood, glass , plastic floor, natural rubber Abrasion resistance test of other materials.

Applicable standards:

QB/T2726-2005, ASTM D4060, ASTM D1175, D1044, DIN53754, 53799, 53109, 52347, ISO5470, GB/ T4085.

Main parameters:

01. Display mode: LCD screen display, no J speed adjustment;

02. Test piece: Outer diameter φ108 mm, inner diameter φ6 mm;

03. Grinding wheel: φ2″(MAX.52mm) 1/2″(W);

04. Center distance grinding wheel: 63.5 mm;

05. Center distance tbetween grinding wheel and test wheel: 37~38mm;

06. Rotation speed: 60/72 rpm;

07. Load: 250g, 750g, 1000g;

08. Counter: LCD liquid crystal display, 0~999999, automatic stop;

09. Distance between test piece and vacuum cleaner: 3mm;

10. Power supply : 1∮, AC220V, 50HZ.

Formula for calculating the wear index:

Weight loss/test revolutions*1000

Optional grinding wheel model:

H18, H22 , CS10, CS17, CS32, CS33, etc.

Main purpose:

Plastic Abrasion Tester/Taber Abrasion Tester Use a standard knife to cut the sample, specify the type of sandpaper and load a certain weight Wear it, take out the test piece after reaching the specified number of revolutions, and observe the condition of the test piece. It is suitable for the abrasion resistance test of leather, cloth, paint, paper, floor tiles,plywood, glass, plastic floor, natural rubber and other materials.

Applicable standard:

QB/T2726-2005, ASTMD4060, ASTM D1175, D1044, DIN53754, 53799, 53109, 52347, ISO5470, GB/T4085 .

Prev: Martindale Abrasion Tester/Fabric Flat Abrasion Tester