Small Mechanics Precision Tensile Instrument

Precision pulling instrument for small mechanics Application: Suitable for fiber reinforced plastics, waterproof plastics, rubber, waterproof membranes, waterproof coatings, wires and cables, adhesives, textiles, biological materials, elastic stretch, compression, three-point (four-point) bending, 90 degrees peeling, 180 degrees peeling, shearing, tearing, bursting (puncture), sponge indentation hardness and other tests.

Small Mechanics Precision Pull Tool is widely used in tensile, compression, bending, shear, peeling, tearing and other testing of all extremely fine and small materials within a load of 1 N. It can accurately calculate the tensile force, tensile strength, Determination of breaking strength , initial modulus, elongation at break, stress strain, yield strength and special tests for some products. Three closed loop measurements and checks can be repeated cycles and low-cycle fatigue testing, etc. It has high reliability and is easy to operate. It meets the requirements of various standards such as GB, ISO, JIS, ASTM, DIN, etc., and can edit test software and test accessories adapt to user needs. Precision instruments for schools, scientific research units and product quality supervision departments.

Precision pull tool for small mechanics The design of the host and auxiliary equipment is based on foreign technology, with a beautiful appearance and easy operation Convenient, stable and reliable performance. The computer system controls the rotation of the servo motor through the balance wing instrument controller and the speed control system. After being decelerated by the deceleration system, the moving beam is driven up and down by the precision screw pair to control the stretching, compression, bending, sheartilting, etc. of the sample Various mechanical performance tests, no pollution, low noise, high efficiency, with a very wide range of speed regulation and jet travel distance, and equipped with a wide range of test accessories, in the mechanical performance test of metal, non-metal, composite materials and products, has very broad application possibilities.

Small mechanical precision pulling instrumentTechnical parameters:

1. Product Specification: HY-0230
2. Accuracy rate: 0.5 degree
3. Load: 1N
4． Effective Force Range: 0.1/100-99.99%;
5. Test force resolution, load ±500,000 meters; there is no separation between inside and outside and the resolution remains unchanged throughout the process.
6. Effective test width: 120mm
7. Effective test space: 300mm
8. Test Speed: 0.001~300mm/min (arbitrary adjustment)
9. Speed ​​Accuracy: Within ±0.5% of declared value;
10. Displacement measurement accuracy: within ±0.5% of declared value;
11. Distortion measurement accuracy: within ±0.5% of declared value;
12. Voltage control range: 0.005%~6%FS/S
13. Stress control accuracy: when the rate is 14. Voltage control range: 0.002%~6%FS/S
15. Voltage control accuracy: when the rate is 16. Force/Displacement/Deformation Constant Measuring Range: 0.5%~99.99%FS
17. Constant force/displacement/deformation measurement accuracy: when the set value is less than 10% FS, it is within ±1%of the set value; when the set value is ≥10% FS, it is within ±0.1% of the set value value;
18． Platform linkage test: fast/slow two-speed control, jog;
19. Test bench protection: electronic limit protection
20. Test bench return: manual can return to the initial position of the test at high speed, and automatic can return automatically after the test is over;
21. Automatically stop at a certain time for testing, automatically stop at a certain deformation for testing, and automatically stop at a certain load for testing
22. Overload protection: automatic protection when the maximum load exceeds 10%;
23. Automatic diagnosis function, regularly checks the metering system and drive system for overload, overvoltage, overcurrent, overload, etc., and immediately protects under abnormal conditions
23. Power supply: 200W
24. Host weight: 40kg
25. Supply voltage: 220V (single phase)
26. Host size: 430*315*855mm
27. Machine volume: 0.6 square, weight: 77KG.

Prev: Application field for iron sheet rock wool board insulation