Single wear test machine_Rubber in wear test machine

Main application:
Shoe sole wear tester_Rubber din wear tester has the advantages of small sample size, time saving and high friction. the characteristics of non-repeating path, low noise, high efficiency, good reproducibility and easy operation.It is mainly used to test the wear resistance of elastic materials, conveyor belts, rubber, tires, shoe soles, soft synthetic leather and other materials.

 
Meet the standard:
DIN 53516, JIS K6369, GB/T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903 , JIS K6264, GB/T9867, ISO4649, etc.

Shoe sole wear tester_rubber din abrasion tester main parameters:
1. Test piece: φ16mm, 6~15mm (D)
2. Luminaire load: 2.5N
3. Weight load: 2.5N, 5N
4. Armature lateral displacement: 4.2mm/roller per circle
5. Wear abrasive clothk: 60#
6. Roll diameter: 150mm
7. Roll length: 460 mm
8. Roller speed: 40 rpm
9. Planned stroke: 40m/20m
10. Sanding speed : 0.32 m/sec
11. Inclination angle: 3° Angle between the support axis of the test piece and the vertical surface of the roller
12. Volume: 70×30×30cm
13 Weight: 61kg
14. Power supply: 1∮, AC220V, 3A

Detection principle:
Under a certain load, at a certain level of mesh, columnar test The sample is cut crosswise and ground on the mesh surface for a certain stroke, and the mass abrasion of the sample is measured, and then the volume abrasion is calculated according to the density of the sample. similar, a standard rubber should be used at the end. The test results are expressed as the relative volume wear based on the calibrated mesh or as the wear resistance basis expressed against the wear of a standard adhesive.

Logistics service:
1. Fast delivery: Our company has a large stock, and the spot products are delivered within 12 working hours, and 80% of the products are in stock. If our products are temporarily out of stock, our company strives to deliver the goods within 24 hours. If the customer needs the product urgently, our company can notify the factory to ship directly to the customer.
2. Receipt of the goods: Upon receipt of the goods, check that the package is intact in the presence of the courier or postal staff. If others (relatives, friends, companies, etc.) indicate that you acknowledge receipt and verify that it is correct. Our company is committed to providing you with perfect service. If you encounter any problems after purchase, please contact us in time to negotiate and resolve them to avoid misunderstanding!

Prev: RCA abrasion tester for paper tape/RCA abrasion tester for paper tape