Single wear test machine_Rubber in wear test machine

Sole Abrasion Testing Machine_Rubber din Abrasion Testing Machine has the characteristics of small sample size, time saving, non-repetitive friction path, low noise, high efficiency, good performance Reproducibility, easy operation and other characteristics, mainly used to test the wear resistance of elastic materials, conveyor belts, rubber, tires, shoe soles, soft synthetic leather and other materials.

Main Application :
Shoe Sole Abrasion Tester_Rubber din Abrasion Tester has the advantages of small sample size, time saving, non-repetitive friction path, low noise and high efficiency. , good reproducibility, easy operation, etc. It is mainly used to test the wear resistance of elastic materials, conveyor belts, rubber, tires, shoes,soles, soft synthetic leather and other materials.

Meet the standard:
DIN 53516, JIS K6369, GB/T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903 , JIS K6264, GB/T9867, ISO4649, etc.
Shoe sole wear tester_rubber din abrasion tester main parameters:
1. Test piece: φ16mm, 6~15mm (D)
2. Luminaire load: 2.5N
3. Weight load: 2.5N, 5N
4. Armature lateral displacement: 4.2mm/roller per circle
5. Wear abrasive cloth: 60#
6. Roll diameter: 150mm
7. Roll length: 460 mm
8. Roller speed: 40 rpm
9. Planned stroke: 40m/20m
10. Sanding speed : 0.32 m/sec
11. Inclination angle: 3° Angle between the support axis of the test piece and the vertical surface of the roller
12. Volume: 70×30×30cm
13 Weight: 61kg
14. Power supply: 1∮, AC220V, 3A

Detection principle:
Under a certain load, at a certain levelau van gaas , columnar test The sample is cut crosswise and ground on the mesh surface for a given impact, by measuring the mass wear of the sample and then the volume wear is calculated according to the density of the sample. In order to make the test comparable, the standard rubber must be used at the end and the test result is expressed as the relative volume based on the calibrated mesh.

Logistics service:
1. Fast delivery: Our company has a large stock, and the spot products are delivered within 12 working hours, and 80% of the products are in stock. If our products are temporarily out of stock, our company strives to deliver the goods within 24 hours. If the customer needs the product urgently, our company can call the factory at theto ship directly to the customer.
2. Receipt of the goods: When you receive the goods, please check whether the package is intact for the courier or postal staff. If others (family members, friends, companies, etc.) agree to sign for it, it means you acknowledge Received and verify that it is correct. Our company is committed to providing you with perfect service. If you encounter any problems after purchase, please contact us in time to negotiate and resolve them to avoid misunderstanding!

Prev: GB9867 Rubber Roller Abrasion Testing Machine / Rubber Roller Abrasion Testing Machine