Shanghai mobile phone sapphire glass screen wear tester price

Product name:

Shanghai mobile phone sapphire glass screen abrasion tester price

Main purpose:

Shanghai mobile phone sapphire glass screen wear tester price is used to test the scratch resistance and scratch resistance of screens, tempered glass and other glass products. The number of rubs is determined by the counter and the governor controls the operation of the friction head Speed ​​to meet the actual testing needs of customers.

Test Principle:

In the test, steel wool cloth is installed on the friction head with a size of 10mm*10mm, and the adjustable weight adjusts the pressure load of the friction head to move across the glass to rub. After the experiment, the samples were taken to evaluate their scratch resistance and scratch resistance.

Technical parameters:

1. Test module: three station glass friction module;

2. Reciprocating platform travel distance: 50 ± 5 mm instelable;

3. Mobile platform movement speed: 0-120rpm adjustable;

4. Friction test load: 10N/station;

5. Power supply: AC 220V 50HZ;

6. Dimensions: 700mm * 300mm * 270mm (L * W * H);

7. Weight: 51kg;

8 Friction head : 10mm*10mm size, contact the sample with the steel wool instrument.

Description of keys:

1. Reset key: Mute the sound and reset the real-time laps of the timer;

2. Start key: After the speed switch is turned on Used to start the engine;

3. Governor: used to adjust the speed of the motor;

4. Adjustable weight: used to adjust the load applied to the friction head Size;

5. Mode Switch: Pull it up for continuous automatic operation mode. In this mode, after the machine runs for the set number of times, the machine keeps rubbing, and the toner stops working after turning off thethe power supply of the toner; Pull it down to number mode, in this mode, the motor will stop after the equipment run the set number of times.

Experimental preparation:

1. Cut out a sample with a size of 200mm*150mm from the whole sample, or cut 3 samples of 100mm*50mm;

2. By adjusting the screw connecting the friction head, adjust the gap between the friction head and the sample so that the contact surface fits perfectly.

Test method:

1. Place the cut sample on the sample clamping platform and clamp it;

2. Attach the weight and make sure the friction head and sample are in full contact and tighten the device;

3. Turn on the machine and select the desired test mode (two frequency modes and continuous operation);

4 . Set the desired number of frictions and select the speed you want to run;

5. Turn on the governor switch, press the startbutton and the device starts running;

6. After the test, record the surface friction of the sample and perform related assessments.

Standard Group (Hong Kong) Co., Ltd., as a modern high-tech enterprise integrating R&D, production, sales, training and service, is committed to bringing more advanced and humanized testing instruments to the market in a safe way. Non-standard customization is more acceptable, and targeted testing can be done before purchase according to customer requirements to ensure that the purchased instrument is suitable.

Prev: Universal friction and wear testing machine/universal wear tester