Main application:
Seat belt abrasion resistance tester/seat belt wear testerSuitable for all types of tires and braces And the test of seat belt abrasion resistance, with a desktop design and 5 test stations .
Technical parameters:
1. Sample load: 2.3 ± 0.05 kg
2. Equipment roll: ¢400mm
3. Drive method: driven by motor
4. Test setup: 2 sets (according to the size of the ribbon)
5. Friction angle: 85±2°
6. Test stroke: 300±20mm
7 Test speed: 30 times/±2min
8. Counting method: digital display
9. Hexagonal bar: 6.35 ± 0.03mm, radius 0.5 ± 0.1mm
Seat belt abrasion tester/seat belt abrasion testerTest standard:
FMVSS 209, S5 1(d), SAE J339, ASTM/D 6770, FED STD 191, MIL-T8363B , MIL-232223B
Test Principle:
1. Place the test sample and lay with the safetyShuttle the material on, then enter the expected number of test cycles into the cycle counter and the test begins;
2. Once the design cycle count is reached, the machine will automatically stop;
3. Visually evaluate the wear resistance of the sex of the test sample.
Maintenance:
1. The instrument should be cleaned and cleaned regularly to ensure the cleanliness of the test instrument;
2. Clean the test instrument regularly Check to see if there is any abnormality;
3. During the use process, each user should use it according to the correct use method, and should not use it in violation of the regulations, so as not to damage the instrument and shorten the service life of the instrument;
4. After using the test instrument, each user should arrange the instrument and clean the instrument accordingly to ensure that the instrument is clean.clean;
5.When the instrument is not in use, the instrument should be kept. The power is turned off and the instrument is kept clean continuously.
Prev: Sock Abrasion Tester – Sock Abrasion Tester
Next: Seat Belt Wear Testing Machine / Seat Belt Wear Testing Machine