Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Seat Belt Wear Tester/Seat Belt Wear Tester

Seat Belt Wear Tester/Seat Belt Wear Tester

Author:QINSUN Released in:2023-04 Click:23

Seat Belt Wear Testing Machine / Seat Belt Wear Testing Machine is suitable for testing the wear resistance of various tires, braces and seat belts, Desktop design, with 5 detection stations.

Product Introduction

Main Application :
Abrasion resistance tester seat belts/seat belt wear testerSuitable for testing the abrasion resistance of various tires, braces and seat belts. Test, desktop version, with 5 test stations.
Technical parameters:
1. Sample load: 2.3 ± 0.05 kg
2. Equipment roll: ¢400mm
3. Drive method: driven by motor
4. Test setup: 2 sets (according to the size of the ribbon)
5. Friction angle: 85±2°
6. Test stroke: 300±20mm
7 Test speed: 30 times/±2min
8. Counting method: digital display
9. Hexagonalrod: 6.35 ± 0.03 mm, radius 0.5 ± 0.1 mm
Seat belt abrasion tester/seat belt abrasion testerTest standard:
FMVSS 209, S5 1 (d), SAE J339, ASTM/D 6770, FED STD 191, MIL-T8363B , MIL-232223B
Test Principle:
1. Place the test sample and the safety shuttle put the material on it, then enter the expected number of test cycles into the cycle counter, and the test begins;
2. Once the design cycle count is reached, the machine will automatically stop;
3. Visually evaluate the wear resistance of the sex of the test sample.
1. The instrument should be cleaned and cleaned regularly to ensure the cleanliness of the test instrument;
2. Clean the test instrument regularly Check to see if there is any abnormality;
3.During the use, every user should follow correctlydo not use contrary to the instructions, so as not to damage the instrument and shorten the service life of the instrument;
4. After using the test instrument, each user should arrange the instrument and clean the instrument accordingly. cleanliness of the instrument;
5. When the instrument is not in use, power off the instrument and keep the instrument clean.