Rubber DIN Abrasion Tester_Rubber Abrasion Tester

Rubber din Abrasion Tester_Rubber Abrasion Tester has the advantages of small sample size, time saving, non-repetitive friction path, low noise, etc. It is used for Test the wear resistance of rubber, tires, conveyor belts, shoe soles, elastic materials, soft synthetic leather and other materials.

Main Application:
Rubber din Abrasion Tester_Rubber Abrasion Tester has the advantages of small sample size, time saving, non-repetitive friction path, low noise, etc. It is used for testing rubber, tires, Conveyor Belts, soles, elastic materials, soft synthetic leather and other wear-resistant materials.

Meet the standard:
DIN 53516, JIS K6369, GB/T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903 , JIS K6264, GB/T9867, ISO4649.

Rubber din abrasion tester_Rubber abrasion tester main parameters:
1. Test piece: φ16mm, 6~15mm(D)
2. Luminaire load: 2.5N
3. Weight load: 2.5N, 5N
4. Armature lateral displacement: 4.2mm/roller per circle
5. Abrasive abrasive cloth: 60#
6. Roll diameter: 150mm
7. Roll length: 460 mm
8. Roller speed: 40 rpm
9. Planned stroke: 40m/20m
10. Sanding speed: 0.32m/ sec
11. Inclination angle: 3°The angle between the support shaft of the test piece and the vertical surface of the roller.

The main principle:
A certain Under load, at a certain mesh level, the columnar sample cut crosswise and ground on the surface of the mesh for a given stroke, by measuring the mass wear of the sample, and then calculating the volume wear from the density of the sample, to make the test If there is comparability, eventually need tojk standard rubber are used and the test result is expressed as the relative volume wear based on the calibrated mesh or as the wear resistant basis expressed against the wear of a given standard rubber. Note: Additional specific gravity balances need to be purchased for general use.

Logistics service:
1. Fast delivery: Our company has a large stock, and the spot products will be delivered within 12 working hours and 80 % of products are in stock. If our products are temporarily out of stock, our company strives to deliver the goods within 24 hours. If the customer needs the product urgently, our company can notify the factory to ship directly to the customer.
2. Receipt of the goods: When you receive the goods, please check whether the package is intact for the courier or postal staff. If others (family members, friends, businesses, etc.)agreeing to sign for this means that you acknowledge Received and verify that it is correct. Our company is committed to providing you with perfect service. If you encounter any problems after purchase, please contact us in time to negotiate and resolve them to avoid misunderstanding!

Prev: american taber linear abrasion instrument_taber linear abrasion instrument