Rolling Box Pilling Tester Experimental Speed

The rolling box pilling tester is a test equipment independently developed and produced by our company qisnun Precision Electromechanical Technology Co., Ltd. This is a cost-effective and comprehensive after-sales service. Friction and pilling test to assess its level of pilling under unstressed conditions.

Applicable standards:

GB/T4802.3, ISO12945.1, BS5811, JISL1076, IWSTM152

Main parameters:

1. Sample test room: 4;

2. Roll specification: 146 × 152 mm;

3. Cork liner specification: 452 × 146 × 1.5mm (L × W × H);

4. Stirring rod specification: L=121mm;

5. Experimental speed: 1200 rpm;

6. Compressed air: 0.014~0.021 Mpa.

Test principle:

Place 105mm × 105mm samples into the test box respectively , under the action of rotation , the cork wallof the storage box continues to rub randomly, and the timer is set to the specified time. Once the set time is reached, the sound will be tight, indicating that the test is complete. During the test, compressed air will be injected into the test chamber to improve the bend, and the air pressure can be adjusted.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to providing more test instruments to the market, long-term supply of textile, leather, combustion test instruments, automotive interior materials, environmental weather aging, masks and protective clothing, etc., can also accept non-standard customization. Before purchase, we can carry out targeted tests according to customer requirements to ensure that the instruments purchased areadapted.

Prev: The reciprocating speed of the circular track lint and pilling instrument grinding table