Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Respiratory resistance detection of mask detailed analysis

Respiratory resistance detection of mask detailed analysis

Author:QINSUN Released in:2021-09 Click:499

Respiratory resistance detection of mask detailed analysis

Mask detection range:
Haze masks, n95 masks, children's masks, pm2.5 masks, anti-virus masks, masks of various special materials, etc.

Mask testing items:
Respiratory resistance testing, filtration efficiency testing, tightness testing, quality testing, airtightness testing, filtration testing, air permeability testing, etc.

Respiratory resistance detection of mask detailed analysis

Mask testing standards:
AQ 1114-2014 Self-priming filter dust mask for coal mine

BS EN 138-1994 Respiratory protection device. Specification for fresh air hose respirators used with full face masks, half face masks or respirators

BS EN 140-1999 Respiratory protection devices. Half and quarter masks. Requirements, testing and marking

BS EN 402-2003 Respiratory protection equipment for escape. Requirements, inspection and marking for self-assembled open-circuit compressed air breathing apparatus with full face mask or mask accessories

BS EN 404-2005 Respiratory protection device for self-rescue. Anti-carbon monoxide filter self-rescue respirator with mask assembly

EN 402-2003 Respiratory Protector, Compressed Air Vital Capacity Automatic Machine with Full Face Mask or Mask for Escape Requirements, Inspection, Marking

EN 404-2005 self-rescue respirator, anti-carbon monoxide mask type self-rescue filter

DIN EN 402-2003 Respiratory Protector, Compressed Air Vital Capacity Automatic Machine with Full Face Mask or Mask for Escape Requirements, Inspection, Marking

DIN EN 404-2005 self-rescue respirator, anti-carbon monoxide mask type self-rescue filter

FZ/T 73049-2014 knitted mask

Mask inspection method:

  1. When you get the mask, first look at the packaging. It is not damaged, the mask is flat, there is no stains, oils, etc. on the surface, and the bridge of the nose is not exposed. There is no shortage of various components of the mask (especially the nose bridge and ear straps of the mask). Cut the disposable mask. The regular medical disposable mask has three layers. If it is found to be two layers after cutting, it is unqualified. During the wearing process, whether there is any discomfort, and whether there is any allergies on the face.
  2. Extend the ear strap cord by hand to check the quality of the welding point. The bonding surface of the solder joints is uniform and the position is neat. If the welding spot is round, it can basically be judged as manual welding, and there may be several workers in contact. If the welding is square, it can basically be judged as equipment welding, and the quality of the solder joints is stable. If the solder joints are round or square, it can be judged as a mask that is artificially repaired (the ear straps are not welded firmly, and they are manually reprocessed).
  3. You can test the water permeability of the mask. The impermeable ones basically contain a melt blown layer. At the same time, cut the open cover to check the number of mask layers, and conduct an ignition test on the melt blown cloth. If it cannot burn, it can be judged as a melt blown cloth.
  4. Prepare paper towels, tear the paper towels into pieces, the more shred the better, and then pile them into a pile, then take the mask for testing, put it on the pile of paper, cover the outside on the shredded paper, wait for 2 seconds to look over the opening cover Whether the paper scraps can be adsorbed, it can prove that the mask is effective, if not, the middle layer of the mask is either a melt blown cloth or an invalid mask. Melt blown cloth determines whether the mask has a protective effect. The static electricity on it determines the life of the mask. So if the mask cannot absorb paper scraps, then the mask does not have static electricity. A mask without static electricity is scrapped and cannot be used anymore.

qinsun is committed to providing convenient testing services for enterprises and individuals. Simplify the inspection process, improve the efficiency of inspection services, use the Internet + inspection e-commerce to provide customers with diversified choices, fundamentally reduce inspection costs, improve time efficiency, break industry limitations and industry bottlenecks, and create a new platform for industry innovation. The company's main business scope includes food, agricultural products, environmental soil, environmental protection and industry standard training, retail services, etc., to provide you with convenient testing services.

Prev:

Next: