Product introduction
Scope :
Release Paper Peeling Tester can be used for release paper, adhesives, stickers, 3M tape, polymers, plastics, foil, protective film, textiles, fibers, nano material, polymer material, composite material, packaging bag, paper, circuit board patch and other industrial products can be used for thrust, tension, compression, bending and tearing with different test setups, 90° peel, 180° peel, shear, adhesion, pull-out force, yield strength, stretch, puncture and other tests. The professional computer control software can automatically calculate the test parameters such as tensile strength, peel strength, bond strength, puncture strength, tear strength and elongation of the film. This machine is suitable for product quality testing in manufacturing enterprises, laboratories of various universities, testing institutes, measurement institutes, etc.
Based on the standard:
Designed and manufactured according to the relevant specifications of GB17200, the performance meets indicators to GB/T2790 (180° peel strength test of adhesive), GB/T2791 (Adhesive T peel strength test), GB2792 (180° peel strength test of pressure sensitive adhesive tape), GB4850 (low speed roll strength test), GB7754 (shear strength test), GB8808 (composite film peel strength test), ZBY28004 (heat seal strength determination), GB13022 (film pull test), GB7753 (pressure sensitive adhesive tape pull test) and other test method requirements.
Technical specifications:
1. Maximum test force: 20N, 50N, 100N, 200N, 500N, 1000N, 2000N optional;
< p>2. Sensor accuracy: 0.3%;
3. Structure: single column desktop type;
4. Speed setting range: 1~500mm/min;
5. Beam velocity relative error: within ±0.5% ofthe set value;
6. The limit error of the displacement indication value: within ±0.2% of the indication value;
7. Effective test width: 120mm;
8. Effective rack distance: 800mm;
9. Overall dimensions of the host: about 420×450×1150mm;
10. Host weight: about 60kg;
11. Power supply: 220V, 50Hz;
12. Electricity brain-type pulling machine, software and user interface: software and interactive man-machine dialogue operation interface under the WINDOWS environment;
13. The testing process and measurement, display, analysis, control, etc. are all completed by computer;
14. After the sample is broken, the moving beam automatically stops moving (or automatically returns to the initial position);
15. It has two levels of program-controlled and mechanical limit protection;
16. When the load exceeds the rated value, automatic power-off protection;
Standard configuration of the release paper peel testing machine: equipped with imported sensors, one instrument, one set of fixtures, one piece of software, computer adjustment.
Software introduction:
Release paper peeling tester The test software can be controlled separately and conveniently displayed for testing Data, curve, speed, material specifications and other functions, combined with micro printer to print test results, and has the function of automatically returning to the origin. This software is also a (host computer) connection function: connect to a personal computer through the USB interface and R232 serial port, can perform two-way data transmission, directly use computer software to enter the machine control, data analysis, curve drawing, etc. function.
Tensile (holding stress), compression (holding pressure), bending, shear, tear and peel tests can be performed. PCand interface card are used to collect, store, process and print test results. It can calculate the maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus and other parameters; it can perform curve processing, multi-sensor support, graphical interface, flexible data processing, MS-ACCESS database support, Make the system more powerful.
WeChat platform on the scan Copyright：Qinsun Instruments Co., LTD! Qinsun Instruments Co., LTD!Provide technical support Enterprise email
