Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Operation Steps and Precautions of Taber 5155 Abrasive Tester? This is the case

Operation Steps and Precautions of Taber 5155 Abrasive Tester? This is the case

Author: Released in:2022-12-08 Click:30

 

Product introduction

Qianshi Instrument is a motivated, united and cooperative team with strict management. Qianshi has solid R&D, production and sales teams to meet different needs of customers. Products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other industry related testing equipment. Such as washing colorfastness tester, fabric abrasion tester, pilling tester, rubbing colorfastness tester, ironing colorfastness tester, and perspiration colorfastness tester, etc. Taber 5155 wear instrument user manual:

 

Test prep:

1. Mount the sample on the test turntable, select the required test weight and install it, and make sure that the test wheel is in the test No contact with the sample holder during the process.

2. Set the governor switch to the lowest position.

3. After setting the number of tests according to the test requirements, the whole machine is in the test state.

Operating steps Taber 5155 abrasion tester:

*step, taber wear-resistant friction wheel correction

A: elastic (rubber) friction wheel correction

(1) new The grinding wheel uses 2 sheets of sandpaper, 50 each revolutions on paper;

(2) If the grinding wheel used is less thanan 1000 revolutions before, pre-grind 25 revolutions Or 50 revolutions (25 revolutions are recommended for pre-grinding); if it is greater than or equal to 1000 revolutions, pre-mill 50 revolutions.

(3) For every 1000 revolutions of the friction wheel during the test, pre-grinding is required for 25 revolutions or 50 revolutions change.

B: ceramic friction wheel correction

Unless the surface of the friction wheel is defective or otherwise damaged, pre-grinding is not necessary; under normal tests, use a vacuum cleaner every 300 revolutions to clean the surface of abrasive particles.

Sampling: 150mm*150mm, 5pcs (actual sampling 100cm2), for samples with width of less than 125 mm , use thefull width test.

Step 2:

1. Set the corresponding grinding wheel and load according to requirements. Grind the fabric to a certain end point and record the final number of turns; the endpoint may include Pass/Fail criteria such as: loss of breaking strength, yarn breakage, coating/gloss/color loss, pilling and other appearance changes; if customers have their own requirements, which can be used as an end point according to customer requirements.

2. Record the number of rotations at the end of the sample and take the average of 5 samples.

Taber 5155 Abraser Maintenance Items:

1. The instrument must be placed on a stable surface before use,

2. It is not allowed to move the machine during use;

3. Select the corresponding supply voltage, not too high, to avoid burning out the device;

4. When the instrument is abnormal, please contact our company for timely processing;

5. The machine should have a good ventilation environment when it works.

6. Due to the heavy load on each part of the button mechanism, please lubricate the mechanical part in time;

7. Clean the machine after each test and keep it clean;

8. The control box should be wiped with a dry cloth, not a wet cloth.

10. Turn off the power, remove the sample and clean the machine.

Reasons to choose us:

1. We With an after-sales service team, the company has been in the testing industry for more than ten years, has rich practical experience, can solve various problems in a timely manner and quickly, and relieve customers of worries;

2. Spare parts are available to solve the problem of long lead time for spare parts ordering;

3. Provide outsourced maintenance services;

4. We keep pace with the update of industry standards, provide testing tools that meet the updated standards in a timely manner, and provide personalizedjke testing and consulting services;

5. Long-term supply of various testing instruments, welcome customers to call for inquiries ! More information about the Taber 5155 wear tester

Prev:

Next: