Martindale wear tester (taber wear tester)

Martindale Abrasion Tester (Taber Abrasion Tester)Meet the standard:

ASTM D4970, ISO 12945.2 , GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P19/P19, EX19/P 18/18a/18b, ISO 5470 -2, IWTO 40, JIS L1096 8.17.5 Method E, Woolmark TM 112/196, BS EN 388/530/13770, ISO 20344

Martin Taber abrasion tester (taber abrasion tester) application area :

It can detect the abrasion resistance and pilling performance of different plants. Under a certain pressure, the sample and the abrasive are subjected to continuous reversing friction, and the degree of wear and pilling is assessed by comparison with the standard parameters. Touch screen operation with complete programmer, pre-programmed batch and total counts, individually set counts for each test head; 4 speeds selectable including default speedPine tree.

Product details:

Technical parameters:

1. Number of stations: 9 stations;

2. Counting range: 0 ~ 999999 times

3. The maximum stroke: horizontal 60.5 ± 0.5 mm, vertical 24 ± 0.5 mm

4. Mass of material under pressure:

a container : 200±1g

b. Garment sample weight: 395±2g

c. Furniture decoration sample weight: 594±2g

d. Stainless steel butterfly: 260±1g

5. Effective friction diameter of grinding block:

Type A 200g (1.96N) friction head (9kPa)￠28.8 -0.084 mm

Type B 155g (1.52N) friction head (12kPa) ￠90 -0.10mm

6. The relative speed of the holder and the grinding table: 20-70r/min (adjustable)

7. Loading hammer mass: 2385±10g

Instrument configuration and consumables:

1 .9 sets of sample clamps;

2.9 kPa .9 pieces 12kPa weights;

3. A set of Φ38mm and Φ140mm samplers;

4. One piece back plate for Φ38mm and Φ140mm samplers;

5. A set of pillsng test kits;

6. A set of SM50 standard samples;

7. A set of EMPA standard pilling samples and SM-25 standard One piece of abrasive cloth 1.6m×5m ;

8. A set of standard foam 1.5m×0.5m (4 pieces/set);

9. A piece of standard felted wool;

10. 20 Φ90mm felt discs;

11. 50 Φ38mm and Φ140mm blades each;

12. Other accessories recommended by the manufacturer .

Prev: taber wear test machine, wear test machine