Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Martindale wear tester price

Martindale wear tester price

Author:QINSUN Released in:2023-03 Click:33

Main application:
Martindale Abrasion Tester price is used in textile, footwear, garment and other industries, suitable for knitted fabric, woolen fabric, artificial leather, synthetic Abrasion resistance and pilling degree test of leather etc . under pressure.

Test principle:
1. Under a certain pressure, the round fabric sample is mixed with a standard Lissajous abrasive. The motion trajectories of the curves rub against each other, resulting in damage to the sample, and the abrasion resistance of the fabric is expressed by the number of times the sample is damaged.
2. Under a certain pressure, the circular sample is rubbed against the fabric of the same material in the movement trajectory of the Lissajous figure. After reaching the specified number of revolutions, the pilling level of the sample is evaluated.

Meet the standard:
GB/T 13775-92 Cotton, hemp, spun silk woven fabric abrasion resistance test Martindale method

GB/T 21196.1-2007 Textile Martindale method Determination of abrasion resistance of fabrics part 1
GB/T 21196.2-2007 Textile Martindale method Determination of abrasion resistance of substances part 2
GB/T 21196.3-2007 Determination of the abrasion resistance of textile materials by the Martindale method - Part 3
GB/T 21196.4-2007 Determination of the abrasion resistance of textile materials by the Martindale method - Part 4
GB /T 4802.2-1997 Pilling test for textile fabrics Martindale method
GB/T 8690-88 Test method for abrasion of wool fabric Martindale method
ISO 12945-2:2002 Pilling properties of the surface of textile fabric Determination of Part 2 Martindale Method
ASTM/D 4966-1988 Fabric Abrasion Resistance Test Martindale Abrasion Tester
ASTM/D 4970-2002 Fabric Pilling Resistance Test Method Martindale Er tester

Technical parameters:
1. Counting range: 0~999999 times;
2. Number of posts: 9 posts;
3. Mass of pressurized material:
a. Holder: 200±1g
b Clothing Sample Weight: 395±2g
c. Furniture decoration weight: 594 ± 2 g
d Stainless steel butterfly: 260 ± 1 g
4. Range of motion: horizontal: 60.5 ± 0.5 mm, vertical: 24 ± 0.5 mm;
5. Effective friction diameter of the grinding block:
Type A 200g(1.96N) Friction head (9kPa) ¢28.8 -0.084mm
Type B 155g (1.52N) Friction head (12kPa) ¢90 -0.10mm
6. Weight of sample loading hammer: 2385±10g ;
7. The relative moving speed between the holder and the grinding table: 20-70r/min (adjustable).