interprets how to deal with mold pollution in the intelligent artificial climate box-

The smart artificial climate chamber can simulate the natural climate of plants and small animals, but mold is ubiquitous in the natural climate, let alone the smart artificial climate chamber! Don\'t worry, this article is to solve It was written about how to deal with mold pollution in the smart artificial climate box.

Method 1: Scrub with pure water first, then disinfect with 95% alcohol, then irradiate with ultraviolet light.

Method 2: When adding water, heat the water to climate box temperature.

Method 3: (1) Rub with 70% ethanol, then rub with 0.1% promethamine; then smoke with potassium permanganate and formaldehyde in a 1:1 ratio. Note that if it is smoked, be careful to take it out immediately after mixing, then seal the culture chamber cellilar, the odor is very irritating. It must be sterilized before raising the cells, otherwise, there is really no place to put the cells.

Method 4: First wipe the inner wall with 75% alcohol, ventilate for 10 minutes, and irradiate with ultraviolet rays for 30 minutes.

Fifth method: First wipe the inner wall with 75% alcohol, then fumigate with formaldehyde + potassium permanganate overnight, then ventilate for a whole day.

Method 6. Take out the laminate in the climate box and press it under high pressure. Wipe the box wall with 75% alcohol, then wipe it with Shiro, then irradiate it with ultraviolet light overnight. The effect is good.

Method 7: Blowing for a day after fumigation is not enough. It will take at least a week to let the formaldehyde dissipate, otherwise it will not affect cell growth

Method 8: The role of copper sulfate is to inhibit bacterial growth, because the current incubator has antibacterial function.

Prev: interprets the steps to solve the digital display dynamometer signal interference problem –