Interpretation Of Taber Oscillation Meter Test Method

Taber oscillation meter is used to test the properties of transparent materials and coatings on glass and lenses to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials.

Related technical parameters:
Taber oscillatory abrasives are also commonly referred to as "sand oscillators". It is primarily used to test the properties of transparent materials and coatings coated on glass and lenses. It can also be used to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials. The sample is fixed in a fixed fixture at the bottom of the sand table , The sample surface exposed height of not more than 1mm. In the sand table into a uniform depth of the standard wear media such as quartz sand or alumina sand table in a specific drive driven before and after the reciprocating movement, thereby driving the entire sand table in the wear medium movement. This stoppage mode of the abrasive media can be used to simulate the wear and tear of the product in daily life, and the Taber Oscillator also allows the user to use a liquid abrasive slurry for wear and tear testing. Buy the relevant accessories, the user can also lens "Bayer test". The purpose of this is mainly to compare with the reference lens. The test parameters of the Taber Oscillator can be adjusted, and the user can choose the length (0.25 to 6 inches) and the speed (100-200 rounds per minute). In addition, the oscillating mill allows the user to use different types of abrasive media including quartz sand, alumina, emery and glass beads for testing

Taber oscillation meter basic operation:
1. The sample is fixed in the fixed fixture at the bottom of the sand table, the sample surface exposed height of not more than 1mm;
2. Put a uniform depth of standard abrasive media such as quartz sand or alumina in the sand table;
3. Sand table in a specific drive driven before and after the reciprocating movement, thus driving the entire sand table in the wear medium movement;
4. This random scrape pattern of the wear medium simulates the wear and tear of the product in daily life.
Taber oscillation meter test method:
1. Allows the user to use a liquid abrasive slurry for wear and tear testing. Buy the relevant accessories, the user can also lens "Bayer test". The purpose is primarily for comparison with the reference lens.
2. The instrument's test parameters can be adjusted so that the user can choose the length of the back and forth (1,2,3 or 4 inches) and speed (100-200 rounds per minute). In addition, the oscillating mill allows the user to test different types of abrasive media including quartz sand, alumina, emery and glass beads.

Prev: Physical Testing Standards for Wet Abrasion Scrub Tester