Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Interpretation of related work introduction of electronic rubber tensioning machine

Interpretation of related work introduction of electronic rubber tensioning machine

Author:QINSUN Released in:2023-05 Click:82

Electronic rubber tensile machine is suitable for measuring mechanical properties of materials such as tension, tear and peel. When using an inverter, it can be used for compression testing of materials.

This machine is a new type of cost-effective materials testing machine, with stepless speed regulation, equipped with force sensor and automatic force tracking device. elongation, during the testing process;

The computer continuously collects signals from the force sensor and automatic elongation tracking device, and performs formatted data processing according to test requirements;

It features simple operation, stable performance, advanced advanced technology, high level of automation, high test accuracy.

Main technical indicators

1 Range: 10N, 20N, 30N, 50N, 100N, 200N, 300N, 500N, 1KN, 2KN, 3KN, 5KN. The maximum capacity of this machine does not exceed 5000N.

2 Force value accuracy: ±0.5% of indicated value.

3 Testing speed: 10mm/min~500mm/min

4 Effective stretching distance: 900mm. (Without bracket) (Standard specification)

5 Displacement measurement accuracy: ±0.5% of indicated value.

6 Power supply: AC220V±5% 50Hz

Machine size: about 640×720×2000 mm length×width×height.

Machine weight: approx. 280 kg.

Use environment and working conditions

1 The temperature is between 0 and 40°C;

2 Relative The temperature is less than 80%;
3 There is an independent ground wire; 
4 In an environment without shock or vibration;
5 In an environment without obvious electromagnetic field;
6 There must be no moins than 0.7m of space around the testing machine, and the working environment is clean and dust-free;

7 The flatness of the plinth and frame should not exceed 0.2/1000.