Interpretation of factors that interfere with cooling of high and low temperature moist heat test chambers

1. The ambient temperature is too high due to poor heat dissipation in the laboratory, especially the air-cooled high and low temperature intelligent humidity and heat test chamber. When cooling, it must dissipate heat. Install an exhaust fan to allow air convection to remove heat or choose a comparison. It is also possible for a large laboratory to have sufficiently large windows. The main thing is not to let the temperature rise above 35 degrees. Equipment may not be able to dissipate heat and cool slowly. In severe cases, the refrigeration system may fail.
2. Part of the energized products with heating loads also interfere with the temperature in the test chamber, which will increase the temperature in the room. 
3. customers who use roomshigh and low temperature humidity and heat test also need to pay attention to the equipment abnormality at all times, just like people who are going to get sick and catch a cold, there will always be symptoms at the beginning, n Don\'t wait for the problem to be really serious to bother you The bigger it is, the more it will cost.
4. If the compressor can still work normally. If the compressor does not start when we set the low temperature to work, it may be a failure or a refrigerant leak. These will interfere with the cooling of the high and low temperature box.

Prev: Interpreting Cable Fault Tester Cable Fault Causes