Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > How To Properly Handle Ink Abrasion Tester

How To Properly Handle Ink Abrasion Tester

Author:QINSUN Released in:2017-08 Click:1293

How To Properly Handle Ink Abrasion Tester

Ink Abrasion Tester for color fastness purposes: bleaching ink printing wearable device is mainly used in the printing ink printed wear resistance, abrasion resistance color box, Ps Edition photosensitive layer surface coating wear resistance and abrasion resistance related products Test test. Effective analysis of the printed matter of the anti-friction differences, ink film off, Ps version of the low resistance to India and other products, the hardness difference between the coating and other issues.

 

Ink Abrasion Color Fastness Testing Machine principle: ink printing bleaching and wear-resistant instrument through the measured object and white forest paper friction to determine its wear resistance and decolorization degree. Ink printing bleaching and wear-resistant instrument according to GB GB7706 meet JIS5701 and ISO9000 authorities standards. The friction block is linearly reciprocating; the stroke is about 60mm. Remove the upper friction body with white dao paper take the length of 50mm × 230mm, the fixed on the friction body (white rubber body).

 

Ink Abrasion Color Fastness Testing Machine operating steps:
1, the test sample will be fixed on the friction table.
2, will be wrapped with white forest paper on the friction through, fixed on the transmission arm, and then set the weight. Open the calculator box, you can set the number of friction selection, friction speed 21,43,85,106 times four speed adjustable.
3, press the 0N / OFF switch, the number of friction can be set to the number of automatic shutdown.

Prev:

Next: