GB9867 Rubber Roller Abrasion Testing Machine-Shao Poer Type Abrasion Testing Machine

GB9867 Rubber Roller Abrasion Tester-Shao Poer Type Abrasion TesterComplies with standard:
DIN 53516, JIS K6369, GB /T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.

GB9867 Rubber Roller Abrasion Tester-Shao Poer Type Abrasion TesterMain parameters:
Test piece: φ16mm, 6~15mm (D)
Jig load: 2.5N
Load weight: 2.5N , 5N
Clamp side displacement: 4.2mm/roll per circle
Sanding cloth: 60#
Roll diameter: 150mm
Roll length: 460mm
Roll speed: 40rpm
Planned stroke: 40m/20m
Wear rate: 0.32m/sec
Pitch angle: 3° The angle between the blade support axis and the vertical surface of the roller
Volume : 70×30×30cm
Weight: 61kg
Power supply: 1∮, AC220V, 3A

Test principle:
Under a certain load, at a certain level goas, the columnar sample is transversely cut and ground on the surface of the mesh to a certain stroke, through the mass wear of the sample, and then calculate the volume wear according to the density of the sample, in order to make the test comparable, should at the end the standard rubber is used and the test result is expressed as the calibrated mesh as the basis relative volume wear or foot is expressed as the wear resistance basis against the wear of a particular standard rubber.
Note: Specific Gravity Balance must be purchased separately for general use

Service Warranty:
1, Outdoor the warranty period, our company\'s technical personnel will make no less than three repeat visits per year to examine the user\'s use;
2. Service principle: fast, decisive, accurate, considerate and professional;
3. Servicepurpose: service quality Win customer satisfaction;
4. Service efficiency: If the equipment malfunctions within the warranty period or outside the warranty period, the maintenance personnel will provide a solution after the supplier receives the notification within 24 hours.

Prev: Martindale wear tester (taber wear tester)