GB9867 Rubber Roller Abrasion Testing Machine / Rubber Roller Abrasion Testing Machine

GB9867 Rubber Roller Abrasion Testing Machine/Rubber Roller Abrasion Testing Machine is used to test soles, rubber, tires, elastic materials, conveyor belts, soft. resistance of high-quality synthetic leather and other materials has the characteristics of small sample size, time saving, non-repetitive friction path, low noise, high efficiency, good reproducibility and easy operation.

Main application:
GB9867 rubber roller abrasion testing machine / rubber roller abrasion testing machine is used for testing shoe soles, rubber, tires, elastic materials, conveyor belts, soft synthetic leather, etc. The wear resistance of the material has the characteristics of a small sample size, time saving, non-repetitive friction path, low noise, high efficiency, good reproducibilityID and easy operation.
Detection principle:
Under a certain load, at a certain level of mesh, the columnar sample is transversely cut and ground on the surface of the mesh for a certain impact, and measured The mass abrasion of the sample, and then the volume abrasion is calculated according to the density of the sample. In order to make the test comparable, the standard rubber should be used at the end, and the test result is expressed as the relative volume based on the calibrated gauze The degree of wear or foot is expressed as the wear resistant base number in relation to the degree of wear of a given standard adhesive.

GB9867 Rubber Roller Abrasion Testing Machine/Rubber Roller Abrasion Testing Machine Main parameters:
1. Test piece: φ16mm, 6~15mm (D)
2 Armature load: 2.5N
3. Weight load: 2.5N, 5N
4. Lateral displacement armature: 4,2mm/roll per circle
5. Abrasive cloth: 60 #
6. Roll diameter: 150mm; Roll length: 460 mm; Roller speed: 40 rpm
7. Planned stroke: 40m/20m
8. Sanding speed: 0.32 m/sec
9. The inclination angle is 3°: the angle between the support axis of the test piece and the vertical surface of the roller

complies with the standard:
DIN 53516, JIS K6369, GB/ T 20991 No. 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649

After-sales service:
1. We have an after-sales service team. The company has been engaged in the testing industry for more than ten years, has accumulated rich practical experience, and can deal with various problems in a timely and prompt manner. Alleviate the worries for customers;
2. Spare parts are available to solve the problem of long lead time for spare parts ordering;
3. Provide outsourced maintenance services;
4. We keep the update of theupdate industry standards and timely deliver test tools that meet updated standards, and provide personalized testing and consulting services;
5. Long-term supply of various test instruments.

Prev: RCA abrasion tester for paper tape/RCA abrasion tester for paper tape