Frequently Asked Questions About Humidifying Device of Water Cooled Xenon Lamp Aging Test Chamber

The humidification function of the water-cooled xenon lamp aging test chamber mainly uses a humidifier. Therefore, if the humidity of the xenon lamp climate test chamber is unstable under normal circumstances, it may be a problem with the humidifier of the equipment. Our company Qisnun Precision Mechanical and Electrical Technology Co., Ltd. is the equipment manufacturer. , R&D engineers will introduce common humidifier problems and solutions, hoping to be helpful to customers.

1. The water tank of the humidifier is not sufficient.

Answer: Add water. Remove the steam pipe, lift the water tank off the base, turn the water tank upside down, open the water adding cap and add a certain amount of water into the water tank. After the water injection is completed, tighten the water capwater and check the water cap and spring valve. (Exit) If there are drops. According to the pairing requirements, place the water tank on the bottom cover - the water tank matches the bottom.

2. The gas circuit connection of the xenon lamp aging test chamber is poor.

Treatment method: place the humidifier on the ground behind the right side of the artificial climate box, then insert the steam outlet pipe into the gas production pipe and use a soft plastic tube special to connect the steam outlet. pipe from the humidifier to the artificial climate box. The steam inlet pipe must be kept at an angle >3°. Do not allow the plastic pipe to sag or flatten to avoid water condensation and blocking the passage of steam.

3. There is a circuit connection problem.

Solution: Insert the electrical plug into the socketlocated on the right and rear sides of the humidifier for use. The power supply to the humidifier is controlled by the artificial climate box to ensure no humidity.

In addition, if there is a problem with the control system of the xenon lamp aging test chamber, or if there is a problem with the humidification pump , this situation must be resolved by contacting the technical personnel of the manufacturer. It is strictly prohibited to remove the test chamber for repair without authorization to avoid causing irreversible damage to the instrument. Fixing the damage and fixing it yourself at the same time will also cause some safety issues. Therefore, reporting the repair to the manufacturer is a more effective solution.

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and serviceCE, is committed to putting more testing instruments on the market and providing long-term supply of textiles, leather, combustion testing instruments, automobile interior materials, environmental climate aging, masks and protective clothing, etc. can also be customized to meet non-standard requirements. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: Scratch resistance tester scratch speed and scratch angle