Drum Wear Tester/Roller Wear Tester

Drum Type Abrasion Tester/Roller Abrasion Tester is mainly used for testing rubber, tires, shoe soles, elastic materials, conveyor belts, soft synthetic Abrasion resistance of leather and other materials.

Main Application:
Drum Type Abrasion Tester/Roller Abrasion Tester is mainly used for testing rubber, tires, shoe soles, elastic materials, conveyor belts, soft synthetic leather and other materials Abrasion resistance.

Main features:
1. Small sample, time saving, low noise, high efficiency;
2. The friction path is not repeated;
3. Good reproducibility and easy operation.

Main parameters of the drum wear tester/roller abrasion testing machine:
1. Test piece: φ16mm, 6~15mm (D)
2. Luminaire load: 2.5N
3. Weight load: 2.5N, 5N
4. Abrasive cloth: 60#
5. Roll diameter: 150mm; Roll length: 460 mm; Roller speed: 40 rpm
6. Planned stroke: 40m/20m
7. Sanding speed: 0.32m/sec
8. The angle of inclination is 3°: the support shaft of the test piece is clamped with the vertical surface of the roll angle
9. The lateral displacement of the armature: 4.2mm/roll per circle.

Comply with the standard:
DIN 53516, JIS K6369 , GB/T 8.3 of 20991 , GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649

Detection principle:
Under a certain load , at a certain level of mesh, the columnar sample is transversely cut and ground on the surface of the mesh for a certain impact, by measuring the mass abrasion of the sample, and then calculating the volume of wear by the density of the sample, to to make the test comparable, must meet itend standard rubber are used and the test result is expressed as the relative volume wear based on the calibrated mesh or the abrasion resistance basis expressed as the wear against a given standard rubber.

Service Guarantee:
1. Under warrantyOutside of the repair period, our company's technical personnel will make no less than three repeat visits per year to examine user usage;
2. Service principle: fast, decisive, accurate, considerate and professional;
3. Service goal: service quality to win satisfied users; 4. Service efficiency: If the equipment fails within the warranty period or outside the warranty period, after the supplier receives the notification, the maintenance personnel will provide a solution within 24 hours.

Prev: Taber linear abrasion tool / American taber linear abrasion tool