DIN Rubber Abrasion Tester / DIN Rubber Abrasion Tester

DIN Rubber Abrasion Tester/DIN Rubber Abrasion Tester This machine is suitable for elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather. ． ． Wear measurement of other materials, with high performance, good reproducibility and easy operation

Product introduction

This machine is suitable for elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather. ． ． The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation.
Standards:
DIN 53516, JIS K6369, GB/T 20991 Nr. 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.
/>Test method
Under the specified contact pressure and on a certain area, the sample and the sandpaper are at a certain angle, and the wear resistanceid of the sample when rubbed at a certain level of sandpaper is measured. The sandpaper is wound on the surface of the roller, and the sample is pressed firmly on the roller with sandpaper, so that the sample moves laterally along the roller. The wear is generated at one end of the cylindrical sample. The mass loss value of the sample is measured and tested. The density of the sample was used to calculate the volume loss. Rubber, tires, conveyor belts, soles, soft synthetic leather. ． ． The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation.
DIN Abrasion Tester Leather DIN Abrasion Tester Rubber DIN Roller Abrasion Tester?Test Principle:
Under the specified contact pressure and at the given area, the sample is at a certain angle to the sandpaper, to measure the abrasiveness of the sample is rubbed at a certain levelsandpaper.
The sandpaper package is attached to the surface of the roller, and the sample is pressed firmly on the roller with sandpaper, so that the sample moves laterally along the roller. Wear is generated at one end of the cylindrical sample, the mass loss value of the sample is measured, and the volume abrasion is calculated based on the density of the sample.
Specifications:
Test piece: φ16mm, 6~15mm (D) Quantity: 4.2mm/roller round
Sanding cloth: 60#
Roller diameter: 150mm
Roll length: 460mm
Roll Rotation Speed: 40rpm
Planned Stroke: 40m/20m
Wear Speed: 0.32m/sec
Pitch: 3°The angle between the test piece support axis and the vertical surface of the roll
Volume: 70×30×30cm
Weight: 61kg
Power supply: 1∮, AC220V, 3A
After-sales service:
1. We have an after-sales service team, and the company has been in the testing industry for more than ten years, has a wealth of practicalaccumulated experience;
2. Can solve various problems in time and quickly and unburden customers;
3. Spare parts are available to solve the problem of long delivery time for spare parts ordering;
br />4. Provide outsourced maintenance services;
5. Long-term supply of various commonly used test instruments;

Prev: Alcohol Eraser Pencil Wear Tester – Alcohol Eraser Pencil Wear Tester