Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Cardboard Clamp Holding Strength Testing Machine Technical Parameters

Cardboard Clamp Holding Strength Testing Machine Technical Parameters

Author:QINSUN Released in:2023-08 Click:134

Carton Clamp Holding Force Testing Machine is suitable for all product packaging test checks, testing the product packaging deformation when subjected to horizontal pressure during the transportation and storage, and the ability to protect the packaging to the inner packaging, so as to improve the packaging design. The test equipment independently developed and produced by Qisnun Precision Electromechanical Technology Co., Ltd. is a cost-effective and comprehensive after-sales service.

Complies with Standard:

ASTM D6055, SEARS, Corporate Standard or customized to customer non-standard requirements

Technical Parameters:

Sample Shape: Parallelepipedal Transport Package

Test Weight: 10-300 kg

Clamping pressure: According to the test Handling diagram on the sample can apply 400~3000Lb on the corresponding surfacee (adjustable)

The size of the clamping plate surface: 1200 × 1200mm (length and width)

The size of the test space: 1200 × 1200 × 1000mm (length, width and height)

Clamping space: Size 400*1200*1200

Clamping plate height adjustment: 0~1000mm can be adjusted

Lifting speed: adjustable from 10 to 600 mm/min

Clamping speed: adjustable from 10 to 50 mm/min

Stretching width from splint: 200-2000mm

Transmission mode: servo motor (left and right clamping)

Bottom plate size: 2200×2100mm

Protective Device: Leak Limiter

Splint Requirements: Both clamp plates are guaranteed flat and undeformed under working conditions (2000 pounds). The two splints are parallel, and the splint and the ground are vertical. The thickness of the splint is not less than 20 mm

Force corrector: with display of the value offorce, used to correct clamping pressure

Force Accuracy: Standard Level 1.6

Operation Test: Manual operation lever simulates actual operation on the forklift to control clamping, opening, raising and lowering actions

Power supply: AC220V 50Hz