Automatic focimeter

Product introduction

Full computer control and auto-reading. High-sensitivity optical path control can measure various types of wafers: instantly identify dyed films, color-changing films, progressive films, sunglasses, etc.; with automatic control calibration procedures, it can accurately detect minor errors in the measurement process at any time. It also has PD measurement and printing functions (Type A).

The liquid crystal display can clearly display various functions and data in the main interface and the progressive measurement interface. Introduction The clear progressive lens measurement interface provides more intuitive and accurate parameters for progressive multifocal measurement. The built-in imported clockwork is used as a sensitive printer, and the measurement results can be printed quickly with just one key.

The tilt angle of the LCD screen can be adjusted within a range of 45 degrees, and the brightness can be adjusted according to needs.Whether you are sitting or standing, you can clearly observe the operation process at a parallel angle .

Automatic lensmeterTechnical parameters:

Measuring range

Spherical force

0~±20 D

Cylindrical force

0~6.00 D

Axial force of astigmatism

0°~180° (1° per step)

Increase Degree

0~9.99 D

Prism Degree

0～6△

Display scale for measurements

Diopter

0.01/0.12/0.25 D

Prism degree

0.01/0.12/0.25 D

Measuring mode

Cylinder

﹢ /±/﹣

Prism

X-Y/P-B

Measurement rate

0.2″

Measuring wavelength

630 nm

Measurable lens diameter

18~110 nm

Abbe number

30~ 60

Display

LCD (Liquid Crystal Display)

Printer

Thermal printer

Size

290(L)×200(W)×450(H)mm

Weight

7 Kg

Power

220～240V 60Hz 40VA

Prev: YG401E Martindale Wear Tester