Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > 1 Abrasion resistance tester for rubber hoses/Abrasion resistance tester for hose surfaces

1 Abrasion resistance tester for rubber hoses/Abrasion resistance tester for hose surfaces

Author:QINSUN Released in:2023-03 Click:96

It is mainly used to measure the wear resistance of hydraulic hoses with fabric or steel wire reinforcement, and the surface is smooth and flat, and other similar hoses. This equipment meets the requirements of GB/T2721-2007/ISO6945: 1991. It is specially designed to measure the outer layer of rubber hoses and other similar types of hoses with fabric or steel wire reinforcement and a smooth and flat surface. Wear-resistant instrument. At the same time, it can also measure the wear resistance of other pipes and plates (sheets). It is the preferred testing instrument for rubber hose manufacturers, scientific research units and quality control units.
Complies with standard:
《GB/T12721—2007》
《ISO6945:1991》
《Determination of abrasion resistance of rubber hose/outer coating》

The main technical parameters of the hose surface wear resistance testing machine:

1. Reciprocating frequency: 1.25Hz

2. Reciprocating stroke: 100 mm

3 Motor power: 0.75 kW

4. Mold material: tool steel

5. Counterweight: 50N

Performance tester for hose surface abrasion resistance Packing list:

1. One set of host (with clamp tool)

2. Counterweight: 4 pieces 10N counterweight and 2 pieces 5N counterweight

3. One piece of mold

4. Test mandrel: ;19, ;22, ;25 three pieces.

Prev:

Next: