Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Textile Abrasion Test

Textile Abrasion Test

Author:QINSUN Released in:2016-12 Click:2314

Textile AbrasionTest: Wyzenbeek vs Martindale

Martindale vs. Wyzeenbeek-Explained. 

Fabric Abrasion Tester is Suitable for woven, knitted, woven, decorative materials, coated fabrics and other apparent abrasion resistance testing and pilling performance test.

Both Wyzenbeek and Martindale are abrasion tests; which test different properties of a textile. Wyzenbeek involves rubbing along the warp and weft of the fabric whereas Martindale is a figure-8 rub. Success in one test does not infer success in the other.

The Wyzenbeek and Martindale tests are the two methods commonly used to predict wear-ability. Actual performance is determined by many factors such as fiber content, weaves, finishes, furniture design, maintenance, cleaning, and usage. Durability of an upholstery fabric is a complex interaction (combination) of a number of performance tests that, in addition to abrasion, includes seam slippage, piling, tensile strength, and usage.

“ Addressing the excessively large, sometimes phantom, Wyzenbeek wear numbers currently in the industry… ‘we test to either measure failure or to confirm success. We test to convey, not to impress.’ ”

What happens…

Wyzenbeek machine is used for this test allowing sample of the test fabric to be pulled tight in a frame and help stationary. Individual test specimens cut from the warp and weft direction are then rubbed back and forth using an approved fabric as the abradant. The number of double rub cycles achieved before two yarn breaks occur or noticeable wear is observed is recorded as the fabric’s abrasion rating.

Martindale uses an oscillating test. Fabric samples are mounted flat and rubbed in a figure eight like motion using a piece of worsted wool cloth as the abradant. The number of cycles that the fabric can endure before fabric shows objectionable change in appearance (yarn breaks, piling, and holes) is counted. Number of cycles determines abrasion rating.

Abrasion levels are often over specified in the faulty assumption that abrasion tests predict a product’s overall durability and life span. A recent industry survey indicated that for many end-use applications, factors other than surface abrasion are more likely to result in fabric failure and therefore should be considered when evaluating product durability.

Considerations before Specifying

Abrasion resistance is only one component of durability. Considering this in combination with other factors will enable you to choose the most suitable fabrics for your project.

Always consult with your supplier to confirm that the fabric you are considering should perform well in the onsite environment.

Review the results of the other ACT recommended physical property tests for durability. Abrasion results alone do not predict a product’s lifespan.

Consider the style and quality of the furniture the specified fabric will be used on; seat pans with a waterfall edge and upholstered arms of a chair are common areas of wear. Is there adequate padding to support the upholstery?

Take into account the amount of traffic in the environment and the wear the fabric is likely to receive. Keep in mind, the ACT recommended physical tests for durability do not indicate how a product will perform in an abusive environment. • Determine whether or not the fabric will receive regular professional cleaning. Dirt is the enemy of fabric, but improper cleaning will also shorten the durability/lifespan of the product.

Evaluate whether or not the end use requires a fabric treatment. Applying treatments, finishes or backings to a fabric may enhance durability, but may also negatively affect flammability resistance, appearance or environmental properties.

 

 

Prev:

Next: