Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Site: Home > Related Articles > Methods Of Reciprocating Abrasion Testing

Methods Of Reciprocating Abrasion Testing

Author: Released in:2017-10-10 Click:362

Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the wear resistance on the product.

Methods Of Reciprocating Abrasion Testing

Depending on the type of material under evaluation, the visual appearance of a scratch or mar normally involves changes in surface topography, color, or brightness.  Three methods are normally used:

Visual Evaluation – Scratch resistance is normally reported as the minimum load necessary to penetrate the surface of the specimen. The observer increases (decreases) the testing load until the point when a visible line is scratched on the specimen surface. This line should penetrate the surface and not be able to be wiped off.  It is also possible to rank scratches based on an existing standard. A standard numeric rating representing 3 to 5 increasing scratches (or what constitutes a Pass / Fail) may be established for each type of material and used solely for comparison to determine test end point.

Methods Of Reciprocating Abrasion Testing

Test products are fixed at the level of the table, in the abrasives and load with the movement of the provisions under the level of water for the station being worn; The use of the principle of leverage, the other end of the arm with the test weight to maintain balance test arm to ensure the reliability and accuracy of the sample surface load test results.

Abrasives and load frame height is adjustable to be suit for different height of the sample tested. According to the different requirements of customers, the use of different media to test different products friction abrasion resistance.

 

Prev:

Next: